Search the Wisconsin Historical Society's collections
Search: aircraft
Search: manufacturing
Filter: Type of Photograph
Filter: Creator Name of Unknown
| Date: | 11 1929 |
|---|---|
| Description: | Interior of a factory floor, with several large machines for manufacturing aircraft engines, including Landis, Whitcomb Manufacturing Company and Gisholt. ... |
| Date: | 11 07 1929 |
|---|---|
| Description: | Interior of a factory floor, with several large machines for manufacturing aircraft engines under the skylights. A Gisholt lathe is prominently pictured se... |
| Date: | 11 07 1929 |
|---|---|
| Description: | Interior view of a factory floor. Machinery by Whitcomb Manufacturing Company is in the right foreground, and a Comet 7-cylinder aircraft engine is in the ... |
| Date: | 04 22 1930 |
|---|---|
| Description: | Front view of a Alexander Eaglerock A-12 aircraft fitted with the 7-RA Comet air-cooled radial piston engine with seven cylinders. The fixed-wing plane sit... |
| Date: | 03 20 1930 |
|---|---|
| Description: | View inside a 7-D Comet aircraft engine manufacturing and assembly plant. An engine with nose cowling, propeller shaft and cylinders is supported by an eng... |
| Date: | 1919 |
|---|---|
| Description: | Exterior view from field across pond towards Alfred Lawson's aircraft plant, with buildings and smokestacks. Men are working with a pile of lumber on the l... |
| Date: | 07 22 1929 |
|---|---|
| Description: | Left side profile view of a 7-cylinder Comet air-cooled radial piston engine and propeller on a Kreider-Reisner C-4 Challenger aircraft. A design of the Co... |
| Date: | |
|---|---|
| Description: | Three-quarter view from front left of a Fokker Amphibian, Model F-11, sitting on a runway. Two men are sitting on the aircraft, and one man is standing on ... |
| Date: | 07 22 1929 |
|---|---|
| Description: | Left side view of the 7-cylinder Comet engine fitted to the nose of an aircraft under construction. The fuselage is standing on the factory floor. A work t... |
| Date: | 07 22 1929 |
|---|---|
| Description: | Profile view of a 7-cylinder Comet air-cooled radial piston engine, designed by the Comet Engine Corporation on an unidentified make of aircraft at the Oak... |
| Date: | 01 24 1930 |
|---|---|
| Description: | View towards a factory man working at a plant that assembled Comet engines for aircraft. The man is standing at a desk fitted with instruments in a narrow ... |
| Date: | 1919 |
|---|---|
| Description: | Elevated view of drafting tables for aircraft design, presumably inside the Lawson plant. There are several stools, desks and tables set up in the corner o... |
| Date: | 01 24 1930 |
|---|---|
| Description: | View of two factory men at work desks at a plant that assembled Comet aircraft engines. They are sitting on wooden stools between Korn scales in a narrow b... |
| Date: | |
|---|---|
| Description: | Interior view from front of the cabin of a Fairchild Model 71, which seats seven passengers. |
| Date: | |
|---|---|
| Description: | Side view of back of the fuselage and the tail of a Fokker Universal parked outdoors. |
| Date: | |
|---|---|
| Description: | Three-quarter view from front left of a Fokker Amphibian model F-11 sitting on a runway. |
| Date: | 01 24 1930 |
|---|---|
| Description: | View from front of a 7-cylinder Comet airplane engine undergoing assembly. The engine is mounted to a wooden stand, located in a brick manufacturing buildi... |
| Date: | 07 22 1929 |
|---|---|
| Description: | Right side profile view of the front of a Comet 7-D air-cooled radial piston engine and wooden propeller on a Thaden T-2 aircraft. A design of the Comet En... |
| Date: | |
|---|---|
| Description: | Interior view of a Fokker airplane cabin including five seats, a table, a couch, two cabinets, and overhead storage racks. |
| Date: | 1919 |
|---|---|
| Description: | Close-up of the interior structure of a Lawson Air Liner tail assembly. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: