Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
Filter: Subject of protective clothing
| Date: | 05 23 1983 |
|---|---|
| Description: | Eugene Glover, a Falk employee, attends to several castings. Falk caption reads, "To be used in the new (1985) Foundry Capabilities Brochure." |
| Date: | 05 08 1970 |
|---|---|
| Description: | Man welding a 0200R Mixco. Falk caption reads, "Shows stick welding of housing wrapper inside." |
| Date: | 03 03 1956 |
|---|---|
| Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
| Date: | 07 09 1970 |
|---|---|
| Description: | Male employee, John Beck, welding a mud guard to a gear. |
| Date: | 06 1978 |
|---|---|
| Description: | Original Falk caption reads, "A series of photos to illustrate various manufacturing operations for future publications: Also color for slide talks." Male ... |
| Date: | 1985 |
|---|---|
| Description: | Alex Ostrowski, a Falk employee, demonstrates how the Risser-cut-off equipment is used. Original Falk caption reads, "Taken to illustrate foundry Risser-cu... |
| Date: | 07 09 1970 |
|---|---|
| Description: | Male employee, John Beck, arc welding a mud guard to a split ring gear. |
| Date: | 01 07 1964 |
|---|---|
| Description: | Employees in protective clothing near aluminum rolling mill drive. Falk caption reads,"Drawing number 415731 and 415732, patent number 605385. View shows b... |
| Date: | 07 1975 |
|---|---|
| Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
| Date: | 05 1965 |
|---|---|
| Description: | Pinion stand that was later purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Falk caption reads, "Various manufacturing and assemb... |
| Date: | 07 1975 |
|---|---|
| Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
| Date: | 06 16 1969 |
|---|---|
| Description: | Paper mill debarker drum that was purchased and used by the Manitowoc Shipbuilding Company. Man in photograph is unidentified. |
| Date: | 04 14 1956 |
|---|---|
| Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
| Date: | 02 19 1974 |
|---|---|
| Description: | Kiln component that was purchased by F.L. Smidth and used by Dundee Cement Company of Clarksville Missouri. Falk caption reads, "1029-A46 copied by Bracket... |
| Date: | 11 13 1959 |
|---|---|
| Description: | Two male employees weld a large gear. Original Falk caption reads, "Made in halves, 16 feet to zero inch in diameter on the top. Ribs 4 1/2 OL. Premachine ... |
| Date: | 12 07 1955 |
|---|---|
| Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
| Date: | 12 1972 |
|---|---|
| Description: | View of a large casting made in the foundry. A male employee, Arthur Beoman, stands next to the casting as it is being lifted. This unit was purchased by C... |
| Date: | 03 27 1963 |
|---|---|
| Description: | A man welds at the base of an upper chamber. This upper chamber or pressure vessel was purchased by Adamson-United Company of Akron, Ohio, and used by B.F.... |
| Date: | 06 14 1957 |
|---|---|
| Description: | Two seated men weld a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons ... |
| Date: | 06 1957 |
|---|---|
| Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: