Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
| Date: | |
|---|---|
| Description: | Busy street in Milwaukee, bustling with automobiles, pedestrians, and a streetcar. Original Falk caption reads, "Photos borrowed from Milwaukee County Tran... |
| Date: | 12 07 1955 |
|---|---|
| Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
| Date: | 11 29 1978 |
|---|---|
| Description: | Melvin E. Rew attends to a large flange for a mill head. This unit was purchased by Humbolt Wedag and used by Kaiser. |
| Date: | 08 29 1967 |
|---|---|
| Description: | View from above of double reduction-reverse gear that is a component of a gas turbine drive. This gear was purchased by Sun Shipbuilding and Dry Dock Compa... |
| Date: | 10 29 1968 |
|---|---|
| Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
| Date: | 11 25 1968 |
|---|---|
| Description: | A 4 pinion BOF drive that was purchased by Pennsylvania Engineering and used by Youngstown Sheet and Tube. Original Falk caption reads, "4 pinion BOF, shaf... |
| Date: | 11 25 1968 |
|---|---|
| Description: | Dry dock hoist drive that is a component of a Pearlson Syncrolift. This product was later purchased by Pearlson Engineering. Original Falk caption reads, "... |
| Date: | 05 07 1969 |
|---|---|
| Description: | Marine gear unit ready to be shipped. This particular gear unit, a component of a Great Lakes Ore Carrier was purchased by General Motors-Electro Motive Di... |
| Date: | 10 17 1969 |
|---|---|
| Description: | This product was later purchased by Fuller Company (Traylor Engineering and Manufacturing). Falk caption reads, "Estimated rough weight 46,720 pounds. Flan... |
| Date: | 06 12 1970 |
|---|---|
| Description: | This dredge pump drive was purchased by Ellicott. Falk caption reads, "Special (submersible) dredge pump drive. Quad input single output, ratio 1.8214:1. 1... |
| Date: | 06 23 1971 |
|---|---|
| Description: | Speed increaser on the factory floor. This product was purchased by Allis Chalmers and used by the United States Corps of Engineers. Falk caption reads, "L... |
| Date: | 10 08 1971 |
|---|---|
| Description: | This product was purchased by Allis Chalmers and used by Kennecott Copper. Falk caption reads, "5CB3-10 BS speed reducer, ratio 7.394:1 with rifle drilled ... |
| Date: | 01 11 1974 |
|---|---|
| Description: | Non-reversing marine reduction gear that was later purchased and used by Zapata for an offshore oil drilling service boat. Falk caption reads, "Nameplate r... |
| Date: | 04 1980 |
|---|---|
| Description: | Two men, Ervin Kasper and A. Chirello, attend to a large hoist drive. This unit was purchased by GHH Sterkrade and used by Union Oil/Molycorporation. Origi... |
| Date: | 05 1965 |
|---|---|
| Description: | The pinion stand depicted was purchased by U.S. Steel (Allegheny Project) and then used by Gary Steel Works. The two men in the photograph are R. Haag and... |
| Date: | 05 1965 |
|---|---|
| Description: | Secondary TCD drives that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in photograph is R. Moreno. |
| Date: | 05 1965 |
|---|---|
| Description: | Pinions that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in photograph is R. Ponto. |
| Date: | 07 02 1970 |
|---|---|
| Description: | Twin pinion that was a later component of a tug on a controllable pitch propeller. This product was purchased by the Electro-Motive Division of the General... |
| Date: | 03 1977 |
|---|---|
| Description: | This particular unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Company of the Tilden II Mine. |
| Date: | 04 25 1979 |
|---|---|
| Description: | A large single helical ring gear hangs from the ceiling in the Falk factory. This later component of a kiln drive was purchased by Allis Chalmers and used ... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: