Date: | 08 19 1974 |
---|---|
Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
Date: | 04 1975 |
---|---|
Description: | 20 inch coupling slotter at Plant 2. Original Falk caption reads, "Machine number 19-7503 at Plant 2: These pictures of a 20 inch slotter taken for Jack Bl... |
Date: | 06 06 1977 |
---|---|
Description: | Elevated view of a kiln drive that was purchased and used by Dravo Line. Original Falk caption reads, "Color view of May 1977 Pit and Quarry. Photos sent t... |
Date: | 1985 |
---|---|
Description: | Alex Ostrowski, a Falk employee, demonstrates how the Risser-cut-off equipment is used. Original Falk caption reads, "Taken to illustrate foundry Risser-cu... |
Date: | 01 29 1968 |
---|---|
Description: | Coupling that was purchased and used by Sociedad Mixta Siderugia, a steel mill in Argentina. Falk caption reads, "This 240G coupling is largest Falk gear c... |
Date: | 06 20 1968 |
---|---|
Description: | Solid foot radicon purchased by Pearlson Engineering Company Incorporated and exported to Ireland. Falk caption reads, "215J24 SMD, AO14-40 Radicon, 207J24... |
Date: | 08 24 1971 |
---|---|
Description: | Tramway that was used by O.D. Hopkins Association Incorporated of Contoocook, New Hampshire. Falk caption reads, "Tramway (Skylark- customers, Sky Glider) ... |
Date: | 03 18 1977 |
---|---|
Description: | This unit was purchased by the Ford Motor Company. Original Falk caption reads, "Cover die holder block: pattern number 45ZW-51A, approximate weight 25,400... |
Date: | 02 20 1978 |
---|---|
Description: | Anotha Burt, a Falk employee, inspects a large walk gear. This particular gear was purchased by Page Engineering. Original Falk caption reads, "Large walk ... |
Date: | 05 25 1967 |
---|---|
Description: | BOF drive that was later purchased by Chicago Bridge and Iron Company and used by Crucible Steel of Midland, Pennsylvania. |
Date: | 07 09 1970 |
---|---|
Description: | Male employee, John Beck, arc welding a mud guard to a split ring gear. |
Date: | 07 27 1963 |
---|---|
Description: | Fabric wind up that was later purchased and used by B.F. Goodrich of Fort Wayne, Indiana. Falk caption reads,"6F Steelflex coupling black fabric with coati... |
Date: | 01 07 1964 |
---|---|
Description: | Employees in protective clothing near aluminum rolling mill drive. Falk caption reads,"Drawing number 415731 and 415732, patent number 605385. View shows b... |
Date: | 06 24 1966 |
---|---|
Description: | Solid foot radicons. Original Falk caption reads, "43145 is stock of solid-foot radicons in plant 2." The male employee in the photograph is Jim Jones. |
Date: | 03 28 1974 |
---|---|
Description: | Original Falk caption reads, "This photo taken to illustrate pre-heating a large coupling hub by torch prior to making a shrink-fit mounting on a shaft." M... |
Date: | 05 22 1974 |
---|---|
Description: | Original Falk caption reads, "These pictures taken to illustrate a procedure to allow saving and reusing Tivela lube during service or repair operations on... |
Date: | 07 1975 |
---|---|
Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
Date: | 03 1976 |
---|---|
Description: | A male employee, Al Arndt, attends to a slide coupling. This particular coupling was purchased and used by Blaw-Knox. Falk caption reads, "Photos of a spec... |
Date: | 09 21 1971 |
---|---|
Description: | Speed reducer that is a later component of a coal pulverizer. This product was purchased by the Foster Wheeler Corporation and used by the Public Service C... |
Date: | 05 1965 |
---|---|
Description: | Pinion stand that was later purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Falk caption reads, "Various manufacturing and assemb... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: