2402 SPRINGVILLE DR | Property Record | Wisconsin Historical Society

Property Record

2402 SPRINGVILLE DR

Architecture and History Inventory
2402 SPRINGVILLE DR | Property Record | Wisconsin Historical Society
NAMES
Historic Name:Dr. Frank & Betty Iber House
Other Name:
Contributing:
Reference Number:88091
PROPERTY LOCATION
Location (Address):2402 SPRINGVILLE DR
County:Portage
City:Plover
Township/Village:
Unincorporated Community:
Town:
Range:
Direction:
Section:
Quarter Section:
Quarter/Quarter Section:
PROPERTY FEATURES
Year Built:1957
Additions:
Survey Date:20061978
Historic Use:house
Architectural Style:Usonian
Structural System:
Wall Material:Wood
Architect: Frank Lloyd Wright; Marshall Erdman
Other Buildings On Site:
Demolished?:No
Demolished Date:
NATIONAL AND STATE REGISTER OF HISTORIC PLACES
National/State Register Listing Name:Not listed
National Register Listing Date:
State Register Listing Date:
NOTES
Additional Information:A 'site file' exists for this property. It contains additional information such as correspondence, newspaper clippings, or historical information. It is a public record and may be viewed in person at the Wisconsin Historical Society, State Historic Preservation Office. House constructed based on Frank Lloyd Wright's prefabricated house design #1 that he completed for Madison builder Marshall Erdman. Only a total of nine prefab #1 houses have been identified and, of those, only four were built in Wisconsin: the subject Iber Residence; the Eugene Van Tamelen Residence (AHI #94761); the Joseph Mollica Residence (AHI #118890); and the Dr. Arnold Jackson Residence, which was originally built in the Madison area and subsequently moved to Beaver Dam, Wisconsin. Dr. Frank Iber (1898-1990) was a well-known surgeon. A later owner was Betty Fischer Iber who lived from 1927-2016. Briefly in the mid-1950s, Wright teamed up with Madison builder Erdman to design, build, and market prefabricated Usonian houses. The first was the Eugene Van Tamelen House, in 1956. Its plan inspired eight more Wright-Erdman house designs over the next five years, including this one. Like the others, the Iber House has a masonry core housing the family room, kitchen, and fireplace, and the other principal walls are paneled with Masonite strips, joined with battens to create strong horizontal lines. Erdman’s prefabs also used stock doors and awning windows to save money, but buyers could choose among several exterior finishes to fit their budgets and tastes. Instead of concrete block (as with the Van Tamelen House), limestone clads the core here. Random limestone slabs jut out to suggest a natural outcropping (although the actual effect of this technique is less evocative than in other Wright buildings). And although most of the exterior panels and battens are painted like the Van Tamelen residence, Iber’s fascia and soffits are made of blond mahogany, resulting in a single contrasting horizontal band between the walls and the cedar-shake roof. The Iber House’s floor plan, like the exterior treatment, varied and improved upon the Van Tamelen prototype. Both structures were built in a roughly linear plan, with the family room and kitchen set off to create a slight front-facing L. This arrangement exposed the walls on two sides of the living room, allowing more natural light to flood that space. But in the Iber House, the family room was enlarged, and its windows expanded to turn the corner and provide more sunlight. The Iber plan also included a fourth bedroom, a lower terrace stretching along the rear of the bedroom wing, and an enclosed garage instead of a carport. In these ways, the building resembles the Carl Post House in Barrington Hills, Illinois, and (except for the garage) the William Cass House in Richmond, New York. In those buildings, however, brick rather than limestone clads the core.
Bibliographic References:Wendell Nelson, "Frank Lloyd Wright House Resides in Plover," Portage County Gazette, 15 November 2002, pg. 15, col. 1. “Architecture and History Survey: Business 51/Post Rd” WHS project number 07-0824/PT. January-March 2006. Prepared by Heritage Research Ltd. Buildings of Wisconsin manuscript.
RECORD LOCATION
Wisconsin Architecture and History Inventory, State Historic Preservation Office, Wisconsin Historical Society, Madison, Wisconsin

Have Questions?

If you didn't find the record you were looking for, or have other questions about historic preservation, please email us and we can help:

If you have an update, correction, or addition to a record, please include this in your message:

  • AHI number
  • Information to be added or changed
  • Source information

Note: When providing a historical fact, such as the story of a historic event or the name of an architect, be sure to list your sources. We will only create or update a property record if we can verify a submission is factual and accurate.

How to Cite

For the purposes of a bibliography entry or footnote, follow this model:

Wisconsin Architecture and History Inventory Citation
Wisconsin Historical Society, Wisconsin Architecture and History Inventory, "Historic Name", "Town", "County", "State", "Reference Number".