Date: | 1930 |
---|---|
Description: | Men operating large machines at International Harvester's Springfield Works. The factory produced trucks. |
Date: | 1930 |
---|---|
Description: | Factory worker machining implement parts at International Harvester's Rock Falls Works. The factory was owned by the Keystone Manufacturing Company until 1... |
Date: | 1914 |
---|---|
Description: | A worker at International Harvester's Milwaukee Works draining fluid from a machine with a large gear poised over his head. The factory was owned by the Mi... |
Date: | 1936 |
---|---|
Description: | Elevated view of workers building sickle bars for mowers at International Harvester's McCormick Works. The McCormick Works was built by Cyrus McCormick in ... |
Date: | 1939 |
---|---|
Description: | A woman operates the bagging machine at the Red Dot potato chip factory. |
Date: | 08 19 1929 |
---|---|
Description: | Workers lay pipe and repave University Avenue, looking east along the 2400 block. |
Date: | 1931 |
---|---|
Description: | W.R. Jens, Branch Manager, and J.C. Kohlmeyer, Assistant Branch Manager in Milwaukee, look over an International Harvester No. 1-B Hammer Mill. |
Date: | 03 09 1937 |
---|---|
Description: | Factory worker employee boring holes into engine crankcases at Milwaukee Works. |
Date: | 11 04 1937 |
---|---|
Description: | Factory worker operates a machine that grinds the inside of a TracTractor (crawler tractor) track roller shell at Milwaukee Works. Photograph taken by Don ... |
Date: | 07 18 1966 |
---|---|
Description: | Propeller of the S.S. Santa Cruz. Falk caption reads, "Photos taken for reference in study of propeller reversing characteristics for SUN Marine red... |
Date: | 08 15 1967 |
---|---|
Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
Date: | 01 24 1968 |
---|---|
Description: | This maxipress purchased by The National Machinery Company. Falk caption reads, "6000 ton maxipress, 23-120T .7854DP (4 inch CP), 16 inch face. Gear: alloy... |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 03 11 1968 |
---|---|
Description: | This turbine drive was later purchased and used by The Whiton Machine Company. Falk caption reads, "1110YPA-1 speed reducer with lube system and cooler, ra... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft mounted on a BOF drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Fa... |
Date: | 06 16 1969 |
---|---|
Description: | View of a cam that is a component of a 185 cubic yard Walkray Dragline that was purchased and used by Bucyries-Erie Company. An individual cam weight 51,20... |
Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
Date: | |
---|---|
Description: | Factory worker operating a "Hannifin quenching press" at International Harvester's Milwaukee Works. |
Date: | 1947 |
---|---|
Description: | A female factory worker is sitting on a stool to work with metal parts in the ball bearing plant at West Pullman Works. |
Date: | 1947 |
---|---|
Description: | A factory worker at West Pullman Works stands behind a counter surrounded by metal pieces in the ball bearing plant. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: