Date: | 02 1907 |
---|---|
Description: | Workers look on as machine parts are tested at International Harvester's Milwaukee Works. This photograph was displayed at the 1915 Panama-Pacific Internat... |
Date: | 09 30 1938 |
---|---|
Description: | Worker operating a hydraulic Landis machine for grinding pin bearings on crankshafts at International Harvester's Indianapolis Works. The Indianapolis Work... |
Date: | 10 1938 |
---|---|
Description: | Factory worker using a lathe at International Harvester's Indianapolis Truck Engine Works. Original caption reads: "LeBlond crankshaft lathe showing detail... |
Date: | 10 1938 |
---|---|
Description: | Worker inspecting pistons at International Harvester's Indianapolis Motor Truck Engine Works. Original caption reads: "An inspection operation on the wrist... |
Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 06 1957 |
---|---|
Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
Date: | 10 08 1958 |
---|---|
Description: | Two male employees help transport a shipping shield. This shield was purchased by Stearns-Roger Company and used by Westinghouse. Original Falk caption rea... |
Date: | 06 07 1963 |
---|---|
Description: | Single helical hub gear that was a component of an oxygen furnace drive. This gear was purchased by Morgan Engineering Company and used by Pittsburgh Steel... |
Date: | 07 29 1966 |
---|---|
Description: | Ron Kudlewski, a Falk employee, attends to the test stand for large motors in the High Speed Department. This motor was later purchased and used by the Lou... |
Date: | 08 30 1965 |
---|---|
Description: | Man standing near spacer coupling that Chicago Bridge and Iron-East Chicago Industry later purchased and Inland Steel later used. Falk caption reads, "3340... |
Date: | 05 1965 |
---|---|
Description: | Secondary TCD drive that was purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. The male employee in the photograph is Jim Kolbeck. |
Date: | 07 18 1966 |
---|---|
Description: | Propeller of the S.S. Santa Cruz. Falk caption reads, "Photos taken for reference in study of propeller reversing characteristics for SUN Marine red... |
Date: | 09 15 1966 |
---|---|
Description: | Eighteen foot split ring gear that is on display at the Falk Corporation. Falk caption reads, "Photos of ring gear to be displayed at Association of Iron a... |
Date: | 10 28 1966 |
---|---|
Description: | Mill drive that was later purchased by Traylor Engineering and used by Hudson Cement. Original Falk caption reads, "See engineering files for exact descrip... |
Date: | 12 30 1966 |
---|---|
Description: | The 220 G20 gear coupling pictured was later purchased by L.W. Nash Company. Falk caption reads, "220 G20 Gear Coupling per assembly, Drawing number 418288... |
Date: | 08 29 1967 |
---|---|
Description: | View from above of double reduction-reverse gear that is a component of a gas turbine drive. This gear was purchased by Sun Shipbuilding and Dry Dock Compa... |
Date: | 08 15 1967 |
---|---|
Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
Date: | 01 05 1968 |
---|---|
Description: | A 27.000 x 24 vertical dredge pump drive is pictured that was later purchased by Ellicott Machine Corporation. Falk caption reads, "27.000 x 24 vertical dr... |
Date: | 01 11 1968 |
---|---|
Description: | Speed reducer that is a later component of a side entry agitator. This product was purchased by Scientific Design Company Incorporated and used by Amoco Ch... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: