Date: | 1945 |
---|---|
Description: | Two miners at work with shovel and hammer inside International Harvester's Hawkins Mine. |
Date: | 1945 |
---|---|
Description: | Worker at a Hawkins Mine machine shop checking a measurement on a large casting under a trouble light. Hawkins Mine was a subsidiary of International Harve... |
Date: | 1945 |
---|---|
Description: | Original caption reads: "A loaded magazine is mounted on a 20mm cannon in one of the test stands at Hazel Park Firing Range." Frederick Viator is the gunne... |
Date: | 1945 |
---|---|
Description: | Two workers in coveralls and hardhats underground at International Harvester's Hawkins Mine near Hibbing, Minnesota. |
Date: | 1945 |
---|---|
Description: | Worker in an elevator at International Harvester's Hawkins Mine near Hibbing, Minnesota. |
Date: | 1945 |
---|---|
Description: | Two workers, both in overalls and hardhats, use tools underground at International Harvester's Hawkins Mine in Hibbing, Minnesota. One man uses a drill wh... |
Date: | 1945 |
---|---|
Description: | A welder wearing overalls holding a protective mask in front of his face while working at Hawkins Mine. |
Date: | 1945 |
---|---|
Description: | A man uses a hammer and chisel to work at Hawkins Mine, while another man stands behind him. |
Date: | 1945 |
---|---|
Description: | A group of men laying rails at Hawkins Mine while a man in the background is using surveying equipment near the base of a cliff face. |
Date: | 1945 |
---|---|
Description: | Factory worker Oscar Olsen uses a borescope to inspect 20mm cannons at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker James Matzke clamps the barrel of a 20mm cannon at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker James Matzke raises the barrel of a 20mm cannon onto a receiving block to be inspected by Beverly Ackerman at International Harvester's St. ... |
Date: | 1945 |
---|---|
Description: | Factory worker Stella Ringstrand mills a 20mm gun part at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker Byrdine Fowler operates a grinder at International Harvester's St. Paul Works to take down the outer dimension on the gas sleeve of a 20mm c... |
Date: | 1945 |
---|---|
Description: | Factory worker Helen Karas changes a drill bit before working on a prime mover part at International Harvester's St. Paul Works factory. |
Date: | 1945 |
---|---|
Description: | Factory worker Joan Harris sits at a workspace to inspect a 20 mm cannon bolt body part at International Harvester's St. Paul Works. Tools are on the table... |
Date: | 1945 |
---|---|
Description: | Factory worker William Nolan works on the final assembly of a 20 mm cannon before proof firing at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker Lorraine Larsen, a lathe operator, tends to a bolt body for the 20 mm cannon at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker Emil Borchert grinds the shell receiver end of the barrel of a 20 mm cannon at International Harvester's St. Paul Works. |
Date: | 1945 |
---|---|
Description: | Factory worker Edna Fillbrandt wraps parts for a 20 mm cannon at International Harvester's St. Paul Works. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: