Date: | 08 19 1974 |
---|---|
Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
Date: | 08 31 1974 |
---|---|
Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
Date: | 08 31 1974 |
---|---|
Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
Date: | 09 27 1974 |
---|---|
Description: | View of machinery castings that were a later component of a cement mill support roller. This unit was purchased by the Fuller Company and and used by Huron... |
Date: | 10 18 1974 |
---|---|
Description: | Overhead view of a mixing fermenter that was later purchased by the Mixing Equipment Company Incorporated and used by Italproteine of Sardinia, Italy. Orig... |
Date: | 10 1974 |
---|---|
Description: | Fluid power drive that was a later component of a sugar crusher drive. This unit was purchased by Voorhies Supply and used by Glenwood Sugar Cooperative. O... |
Date: | 02 15 1975 |
---|---|
Description: | View of a YBX product cut that was used on a vertical roller mill. This product was later purchased by Allis Chalmers Corporation and used by Kaiser Longho... |
Date: | 02 15 1975 |
---|---|
Description: | View of a YBX product cut that was used on a vertical roller mill. This product was later purchased by Allis Chalmers Corporation and used by Kaiser Longho... |
Date: | 03 10 1975 |
---|---|
Description: | Marine drive that was a later component of a Great Lakes bulk carrier. This unit was purchased by the Electro Motive division of the General Motors Company... |
Date: | 03 10 1975 |
---|---|
Description: | Marine drive that was a later component of a Great Lakes bulk carrier. This unit was purchased by the Electro Motive division of the General Motors Company... |
Date: | 04 1975 |
---|---|
Description: | 20 inch coupling slotter at Plant 2. Original Falk caption reads, "Machine number 19-7503 at Plant 2: These pictures of a 20 inch slotter taken for Jack Bl... |
Date: | 04 25 1975 |
---|---|
Description: | Non-reversing marine drive that was a later component of a 800 foot Great Lakes bulk carrier. This unit was purchased by the Electro Motive Division of the... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 07 1975 |
---|---|
Description: | Male employee, Harold Ladwig, in the Weld Shop. Original Falk caption reads, "A series of pictures taken in Weld shop to illustrate steps in the manufactur... |
Date: | 08 1975 |
---|---|
Description: | Large ring gear that is a later component of a kiln drive. This product was purchased by Allis Chalmers and used by National Steel Pellet Plant. Original F... |
Date: | 09 19 1975 |
---|---|
Description: | A male employee, John Lisiecki, attends to a test of a worm gear. Original Falk caption reads, "This is a close-up of the tooth model in the Tinius-Olsen t... |
Date: | 09 19 1975 |
---|---|
Description: | A male employee, John Lisiecki, attends to a research test on a worm gear tooth model. Original Falk caption reads, "Overall view of test setup for project... |
Date: | 01 15 1975 |
---|---|
Description: | Male employee, Jake Gemmel, attending to a FT coupling. Original Falk caption reads, "These pictures taken to illustrate FT coupling size... this is the la... |
Date: | 02 23 1976 |
---|---|
Description: | Bill Wagner, a Falk employee, attends to a large coupling sleeve. This unit was later used by the Auburn Plant-Baush Drill Press. Original Falk caption rea... |
Date: | 03 1976 |
---|---|
Description: | A male employee, Al Arndt, attends to a slide coupling. This particular coupling was purchased and used by Blaw-Knox. Falk caption reads, "Photos of a spec... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: