Date: | 12 07 1955 |
---|---|
Description: | A worker welds together sections of a press slide that was later purchased by Federal Engineering and used by the automotive industry. |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 04 14 1956 |
---|---|
Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 06 15 1956 |
---|---|
Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 10 09 1956 |
---|---|
Description: | Original Falk caption reads: "Mill Gears, 21 or 22.289T, 1 1/2 DP, 26 inch F. 100 hp, 18.3 rpm mills." Purchaser was Allis Chalmers and it was used by the ... |
Date: | 02 14 1957 |
---|---|
Description: | A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C... |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 04 03 1957 |
---|---|
Description: | Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin... |
Date: | 04 18 1957 |
---|---|
Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
Date: | 04 19 1957 |
---|---|
Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
Date: | 06 14 1957 |
---|---|
Description: | Two seated men weld a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons ... |
Date: | 06 1957 |
---|---|
Description: | A seated man welds a sugar mill drive that was later purchased by E.L. Dennis Engineering Company of New Orleans, Louisiana and used by A. Wilbert's Sons M... |
Date: | 07 03 1957 |
---|---|
Description: | Two male employees ease the top half of a metal casing over a Parallel Double Red Shaft that was purchased by E.L. Smidth and Company. Original Falk captio... |
Date: | 08 09 1957 |
---|---|
Description: | A large Drive Gear rests outside the factory after being removed from the furnace. This product was later purchased by Buffalo Forge Company of Buffalo, Ne... |
Date: | 11 25 1957 |
---|---|
Description: | A male employee operates a large machine at the Falk Corporation. The gear was purchased and used by the Falk Corporation. Original Falk caption reads: "Th... |
Date: | 01 10 1958 |
---|---|
Description: | Large propulsion gear that was later purchased by Bethlehem Steel Company and used by Hitachi Limited of Tokyo, Japan, as a replacement gear in the ship "S... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: