Date: | 10 1938 |
---|---|
Description: | Factory workers spray-painting truck engine blocks in a paint room of International Harvester's Indianapolis Truck Engine Works. Original caption reads: "D... |
Date: | 10 1938 |
---|---|
Description: | Factory operator washing motor truck engine blocks at International Harvester's Indianapolis Motor Truck Works. Original caption reads: "A Blakeslee washin... |
Date: | 10 1938 |
---|---|
Description: | Worker inspecting pistons at International Harvester's Indianapolis Motor Truck Engine Works. Original caption reads: "An inspection operation on the wrist... |
Date: | 10 1938 |
---|---|
Description: | Factory workers preparing completed International truck engines for shipment at International Harvester's Indianapolis Motor Truck Engine Works. Original c... |
Date: | |
---|---|
Description: | Two factory workers assemble motor truck engines at International Harvester's Indianapolis Motor Truck Engine Works. |
Date: | 1977 |
---|---|
Description: | Three assembly line workers assembling a motor truck engine at International Harvester's Indianapolis Motor Truck Engine Works. |
Date: | 08 20 1947 |
---|---|
Description: | Display of a 50-ton machine, developed by the Gisholt Machine Company, that will help speed up production of automobile crankshafts. W.A. Smlja, on the lef... |
Date: | 02 14 1961 |
---|---|
Description: | Two men crouch atop of the large gear, while another stands at the side overseeing the lift. This gear was purchased and used by the Ladish Company of Cuda... |
Date: | 09 15 1966 |
---|---|
Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
Date: | 10 28 1966 |
---|---|
Description: | Mill drive that was later purchased by Traylor Engineering and used by Hudson Cement. Original Falk caption reads, "See engineering files for exact descrip... |
Date: | 10 29 1968 |
---|---|
Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
Date: | 05 23 1973 |
---|---|
Description: | Two employees, Bob Weiss and Clyde Tetzloff, attend to a drive that was purchased by Babcock and Wilcox Company and used by AEP Service Corporation. Falk c... |
Date: | 06 06 1977 |
---|---|
Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
Date: | 03 1979 |
---|---|
Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
Date: | 1947 |
---|---|
Description: | A man working with metal parts as they are carried in baskets along a conveyor suspended from the ceiling at West Pullman Works. |
Date: | 1938 |
---|---|
Description: | Factory worker at International Harvester's Indianapolis Works (Truck Engine Works). Original caption states: "A Blakeslee washing machine for washing cyli... |
Date: | 1940 |
---|---|
Description: | Factory workers at International Harvester's Indianapolis Works (Truck Engine Works). Original caption states: "Castings being taken from Panborn cleaning ... |
Date: | 1910 |
---|---|
Description: | Interior view of an early Pawling and Harnischfeger crane design with cab-operated dial controls. The stencil on the crane says "Pawling and Harnischfeger ... |
Date: | |
---|---|
Description: | An interior 5-ton cab-operated Pawling and Harnischfeger crane running along railroad siding to unload scrap and steel for manufacture. The stencil on the ... |
Date: | 1910 |
---|---|
Description: | An early Pawling and Harnischfeger cab-operated crane with dial operated controllers and a 5-ton type "O" bridge with a type "A" trolley. The operator is i... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: