Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
Filter: Subject of factories
| Date: | 04 15 1971 |
|---|---|
| Description: | View of a male employee, Walter Drolhr, attending to a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R Squibb ... |
| Date: | 09 01 1973 |
|---|---|
| Description: | View of a 200T10 coupling. Falk caption reads, "Photo taken for possible use in T10 service manual. Photos show proper installation procedure." |
| Date: | 02 26 1973 |
|---|---|
| Description: | Original Falk caption reads, "Type 'F' unit housings. View of portage inspection machine in Shop 1." Male employee in photograph is Donald L. Vogt. |
| Date: | |
|---|---|
| Description: | Three Falk employees stand inside of the Falk factory. Around them are various steel beams, machines, and tools. Original Falk caption reads, "Centennial h... |
| Date: | 11 1976 |
|---|---|
| Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
| Date: | 10 02 1969 |
|---|---|
| Description: | Original Falk caption reads, "Views of bevel gear inspection equipment for future use-a product quality control publication." Man in photograph is Rob Scha... |
| Date: | 01 15 1975 |
|---|---|
| Description: | Male employee, Jake Gemmel, attending to a FT coupling. Original Falk caption reads, "These pictures taken to illustrate FT coupling size... this is the la... |
| Date: | 06 12 1968 |
|---|---|
| Description: | Bull gear for shaft mounted on a BOF drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Fa... |
| Date: | 01 05 1968 |
|---|---|
| Description: | A 27.000 x 24 vertical dredge pump drive is pictured that was later purchased by Ellicott Machine Corporation. Falk caption reads, "27.000 x 24 vertical dr... |
| Date: | 05 31 1968 |
|---|---|
| Description: | Primary drive that was manufactured in the Special High Speed Division. This drive was later purchased and used by the Vertol Division/Boeing Corporation. ... |
| Date: | 05 20 1970 |
|---|---|
| Description: | A male employee, Karl Johns, attends to a sound test. |
| Date: | 07 09 1970 |
|---|---|
| Description: | Male employee, John Beck, welding a mud guard to a gear. |
| Date: | 11 29 1978 |
|---|---|
| Description: | This unit was purchased by Humbolt Wedag and used by Kaiser. |
| Date: | 05 1965 |
|---|---|
| Description: | A pinion stand that was later purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. |
| Date: | 11 24 1971 |
|---|---|
| Description: | View of a 600 J shaft mount. Man in photograph is George Tinger. |
| Date: | 09 14 1967 |
|---|---|
| Description: | Double reduction reverse gear that was later purchased by Sun Shipbuilding and Dry Dock Company. Falk caption reads: "Photos taken for possible use as glam... |
| Date: | 01 26 1977 |
|---|---|
| Description: | A Falk employee, George Cira, inspects the components of a later ejection box. This unit was purchased by Central Foundry, a division of the General Motors... |
| Date: | 02 04 1977 |
|---|---|
| Description: | A Falk employee, John Bartaczewicz, inspects a large inlet head. This particular unit was purchased by F.L. Smidth and Company. Original Falk caption reads... |
| Date: | 06 1978 |
|---|---|
| Description: | Original Falk caption reads, "A series of photos to illustrate various manufacturing operations for future publications: Also color for slide talks." Male ... |
| Date: | 08 29 1968 |
|---|---|
| Description: | Split ring gear that was purchased by Allis Chalmers and used by Duval. Falk caption reads, "Milling Splits." Male employee in photograph is Wilbur Keen. |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: