Date: | 08 29 1968 |
---|---|
Description: | Split ring gear that was purchased by Allis Chalmers and used by Duval. Falk caption reads, "Milling Splits." Male employee in photograph is Wilbur Keen. |
Date: | 04 23 1965 |
---|---|
Description: | Bridge drives that the City of Milwaukee purchased and used. Falk caption reads,"Unit drives the opening of Broadway Street. Unit opens each half of the br... |
Date: | 1978 |
---|---|
Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
Date: | 10 04 1977 |
---|---|
Description: | William Rhody, a Falk employee, inspects a large, floating trunnion. This particular unit was purchased by Humboldt-Wedag. Original Falk caption reads, "Fi... |
Date: | 03 03 1978 |
---|---|
Description: | Art Hirt, a Falk employee, inspects a large mixer drive. This unit was purchased by the Mixing Equipment Company. Original Falk caption reads, "Picture tak... |
Date: | 12 1980 |
---|---|
Description: | Al Strobel works on a later component of a marine propulsion drive. Falk caption reads, "Prototype-new 1980 smallest size, used by Falk. In process photos ... |
Date: | 12 29 1970 |
---|---|
Description: | A male employee, Dennis Zastrow, inspects a gear in the gear lab. |
Date: | 07 29 1966 |
---|---|
Description: | Ron Kudlewski, a Falk employee, attends to the test stand for large motors in the High Speed Department. This motor was later purchased and used by the Lou... |
Date: | 04 30 1965 |
---|---|
Description: | This drive was purchased by Pennsylvania Engineering and used by Republic Steel Cleveland. Falk caption reads,"BOF drive, for specifications see Engineerin... |
Date: | 10 28 1966 |
---|---|
Description: | Mill drive that was later purchased by Traylor Engineering and used by Hudson Cement. Original Falk caption reads, "See engineering files for exact descrip... |
Date: | 12 30 1966 |
---|---|
Description: | The 220 G20 gear coupling pictured was later purchased by L.W. Nash Company. Falk caption reads, "220 G20 Gear Coupling per assembly, Drawing number 418288... |
Date: | 12 13 1967 |
---|---|
Description: | Single helical gear purchased by The Fuller Company and later used in Jamaica (as a rotary kiln). Falk caption reads, "Single helical gear, 260 teeth 99667... |
Date: | 01 02 1969 |
---|---|
Description: | Original Falk caption reads, "25G sleeve internal teeth being machined on Fellows machine number 7347 in Shop 4." Man in photograph is Henry Lemmermann." |
Date: | 06 28 1971 |
---|---|
Description: | Component of a kiln that was purchased by F.L. Smidth Company. Falk caption reads, "This is the gear rim for the first fabricate, T-section, split, spring ... |
Date: | 08 19 1974 |
---|---|
Description: | This unit was purchased and used by Armstrong Rubber Company. Original Falk caption reads, "Design horsepower-3143; service horsepower-1500; service factor... |
Date: | 04 1975 |
---|---|
Description: | 20 inch coupling slotter at Plant 2. Original Falk caption reads, "Machine number 19-7503 at Plant 2: These pictures of a 20 inch slotter taken for Jack Bl... |
Date: | 1985 |
---|---|
Description: | Alex Ostrowski, a Falk employee, demonstrates how the Risser-cut-off equipment is used. Original Falk caption reads, "Taken to illustrate foundry Risser-cu... |
Date: | 01 29 1968 |
---|---|
Description: | Coupling that was purchased and used by Sociedad Mixta Siderugia, a steel mill in Argentina. Falk caption reads, "This 240G coupling is largest Falk gear c... |
Date: | 06 20 1968 |
---|---|
Description: | Solid foot radicon purchased by Pearlson Engineering Company Incorporated and exported to Ireland. Falk caption reads, "215J24 SMD, AO14-40 Radicon, 207J24... |
Date: | 03 18 1977 |
---|---|
Description: | This unit was purchased by the Ford Motor Company. Original Falk caption reads, "Cover die holder block: pattern number 45ZW-51A, approximate weight 25,400... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: