Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 11 25 1957 |
---|---|
Description: | A male employee operates a large machine at the Falk Corporation. The gear was purchased and used by the Falk Corporation. Original Falk caption reads: "Th... |
Date: | 05 23 1983 |
---|---|
Description: | Eugene Glover, a Falk employee, attends to several castings. Falk caption reads, "To be used in the new (1985) Foundry Capabilities Brochure." |
Date: | 07 16 1968 |
---|---|
Description: | Two speed increasers that were purchased and used by The Boeing Corporation/Vertol Division. Falk caption reads, "Test stand drives for helicopter componen... |
Date: | 03 13 1972 |
---|---|
Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photo taken in Shop 2." Male employee in photograph is Leonard Bartage... |
Date: | 05 08 1970 |
---|---|
Description: | Man welding a 0200R Mixco. Falk caption reads, "Shows stick welding of housing wrapper inside." |
Date: | 09 15 1966 |
---|---|
Description: | Eighteen foot split ring gear that is on display at the Falk Corporation. Falk caption reads, "Photos of ring gear to be displayed at Association of Iron a... |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 09 14 1971 |
---|---|
Description: | View of a speed reducer that was purchased by the Kennedy Van Saun Corporation and used by Gresic Cement in Indonesia. Falk caption reads, "Design HP-3150,... |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 06 06 1958 |
---|---|
Description: | A male employee oversees the testing of a Lewellen Commercial Variator in the test lab at Falk. |
Date: | 04 15 1971 |
---|---|
Description: | Male employee, Timothy Burton, inspecting a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R. Squibb and Sons. ... |
Date: | 08 08 1973 |
---|---|
Description: | Original Falk caption reads, "These pictures of Machine number 7409 taken for Jack Blank to use as illustration(s) of Falk slotter to gain approval to use ... |
Date: | 08 08 1973 |
---|---|
Description: | Original Falk caption reads, "These pictures of machine number 7409 for Jack Blank to use as illustration of a Falk slotter to gain approval to use a simil... |
Date: | 12 02 1963 |
---|---|
Description: | An employee stands near a cross rail that was later purchased by Onnsud Machine Works and used by Avco Corporation for cargo planes. Falk caption reads,"Ma... |
Date: | 07 22 1970 |
---|---|
Description: | Large mill drive that was purchased by Koppers Corporation and used by Hanna Mining. Original Falk caption reads, "Large ring gear made to 1970. First ring... |
Date: | 09 15 1971 |
---|---|
Description: | This product was purchased by the Kennedy Van Saun Corporation and used by Gresic Cemenent of Indonesia. Original Falk caption reads, "Design HP- 3150, ser... |
Date: | 03 13 1972 |
---|---|
Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photograph was taken in the Heat Treat Department." Male employees in ... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft on a BOF Drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Falk capti... |
Date: | 09 16 1968 |
---|---|
Description: | A cement mill drive that was manufactured in the Speed Reducer Department of the Falk Corporation. This drive was later purchased by Fuller Company and use... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: