Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
Filter: Subject of machinery
Filter: Subject of hats
| Date: | 03 11 1968 |
|---|---|
| Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
| Date: | 09 15 1971 |
|---|---|
| Description: | This product was purchased by the Kennedy Van Saun Corporation and used by Gresic Cemenent of Indonesia. Original Falk caption reads, "Design HP- 3150, ser... |
| Date: | 03 26 1971 |
|---|---|
| Description: | Original Falk caption reads, "Dynamic balancing of a YQA element for use in YQA bulletin 171-110." Male employee in photograph is Edward Rhys. |
| Date: | |
|---|---|
| Description: | Three Falk employees stand inside of the Falk factory. Around them are various steel beams, machines, and tools. Original Falk caption reads, "Centennial h... |
| Date: | 06 12 1968 |
|---|---|
| Description: | Bull gear for shaft mounted on a BOF drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Fa... |
| Date: | 03 13 1957 |
|---|---|
| Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
| Date: | 12 13 1967 |
|---|---|
| Description: | Single helical gear purchased by The Fuller Company and later used in Jamaica (as a rotary kiln). Falk caption reads, "Single helical gear, 260 teeth 99667... |
| Date: | 02 22 1967 |
|---|---|
| Description: | Walking dragline that was later purchased by Marion Power Shovel Company. Falk caption reads, "130 yard power dragline propel crank. Pattern 261C17. Castin... |
| Date: | |
|---|---|
| Description: | Six Falk employees stand in machine shop. There are numerous machines and gear implements surrounding them. Original Falk caption reads, "Centennial histor... |
| Date: | |
|---|---|
| Description: | Three Falk employees stand with a large gear in the foundry. Original Falk caption reads, "Centennial historical photos of old negative which could be lost... |
| Date: | 07 18 1966 |
|---|---|
| Description: | Propeller of the S.S. Santa Cruz. Falk caption reads, "Photos taken for reference in study of propeller reversing characteristics for SUN Marine red... |
| Date: | 10 08 1971 |
|---|---|
| Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
| Date: | 11 20 1968 |
|---|---|
| Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
| Date: | 03 31 1905 |
|---|---|
| Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
| Date: | |
|---|---|
| Description: | Five Falk employees stand inside the foundry. They stand among various gears and machinery. In the background, two more employees are visible. Original Fal... |
| Date: | 06 06 1958 |
|---|---|
| Description: | A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ... |
| Date: | 09 15 1966 |
|---|---|
| Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
| Date: | 08 15 1967 |
|---|---|
| Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
| Date: | 09 31 1968 |
|---|---|
| Description: | Split ring gear that is a component of a rod mill that was purchased by ACC-Vickers-Babcock Limited and then exported to India. Falk caption reads, "215 in... |
| Date: | 10 31 1968 |
|---|---|
| Description: | Split ring gear that was a later component of a rod mill was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: