Date: | 07 16 1968 |
---|---|
Description: | Two speed increasers that were purchased and used by The Boeing Corporation/Vertol Division. Falk caption reads, "Test stand drives for helicopter componen... |
Date: | 09 15 1966 |
---|---|
Description: | Eighteen foot split ring gear that is on display at the Falk Corporation. Falk caption reads, "Photos of ring gear to be displayed at Association of Iron a... |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
Date: | 06 06 1958 |
---|---|
Description: | A male employee oversees the testing of a Lewellen Commercial Variator in the test lab at Falk. |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 12 02 1963 |
---|---|
Description: | An employee stands near a cross rail that was later purchased by Onnsud Machine Works and used by Avco Corporation for cargo planes. Falk caption reads,"Ma... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft on a BOF Drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Falk capti... |
Date: | 09 16 1968 |
---|---|
Description: | A cement mill drive that was manufactured in the Speed Reducer Department of the Falk Corporation. This drive was later purchased by Fuller Company and use... |
Date: | 07 16 1968 |
---|---|
Description: | Special speed increasers that were purchased and used by The Boeing Corporations Vertol Division. Falk caption reads, "Test stand drives for helicopter com... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft mounted on a BOF drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Fa... |
Date: | 05 31 1968 |
---|---|
Description: | Primary drive that was manufactured in the Special High Speed Division. This drive was later purchased and used by the Vertol Division/Boeing Corporation. ... |
Date: | 09 14 1967 |
---|---|
Description: | Double reduction reverse gear that was later purchased by Sun Shipbuilding and Dry Dock Company. Falk caption reads: "Photos taken for possible use as glam... |
Date: | 08 29 1968 |
---|---|
Description: | Split ring gear that was purchased by Allis Chalmers and used by Duval. Falk caption reads, "Milling Splits." Male employee in photograph is Wilbur Keen. |
Date: | 03 13 1957 |
---|---|
Description: | Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2... |
Date: | 1978 |
---|---|
Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
Date: | 07 29 1966 |
---|---|
Description: | Ron Kudlewski, a Falk employee, attends to the test stand for large motors in the High Speed Department. This motor was later purchased and used by the Lou... |
Date: | 04 30 1965 |
---|---|
Description: | This drive was purchased by Pennsylvania Engineering and used by Republic Steel Cleveland. Falk caption reads,"BOF drive, for specifications see Engineerin... |
Date: | 10 28 1966 |
---|---|
Description: | Mill drive that was later purchased by Traylor Engineering and used by Hudson Cement. Original Falk caption reads, "See engineering files for exact descrip... |
Date: | 12 30 1966 |
---|---|
Description: | The 220 G20 gear coupling pictured was later purchased by L.W. Nash Company. Falk caption reads, "220 G20 Gear Coupling per assembly, Drawing number 418288... |
Date: | 12 13 1967 |
---|---|
Description: | Single helical gear purchased by The Fuller Company and later used in Jamaica (as a rotary kiln). Falk caption reads, "Single helical gear, 260 teeth 99667... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: