Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
Filter: Subject of machinery
| Date: | 11 20 1968 |
|---|---|
| Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
| Date: | 05 07 1969 |
|---|---|
| Description: | This product was purchased by General Motors-Electro Motive Division and used by Litton Industries as a Great Lakes Ore Carrier. Falk caption reads, "Port ... |
| Date: | 01 20 1969 |
|---|---|
| Description: | Gas turbine test stand drive that was purchased and used by Pratt and Whitney Aircraft Division. Original Falk caption reads, "Two special units and ratio ... |
| Date: | 06 16 1969 |
|---|---|
| Description: | Paper mill debarker drum that was purchased and used by the Manitowoc Shipbuilding Company. Man in photograph is unidentified. |
| Date: | 02 26 1973 |
|---|---|
| Description: | View of the Burgmaster Machine in Shop 3. Male employee in photograph is Kem Megal. |
| Date: | 03 31 1905 |
|---|---|
| Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
| Date: | 1945 |
|---|---|
| Description: | Man in protective gloves and masked helmet against heat and flame works on heavy machinery at the Falk Corporation, known for production of industrial gear... |
| Date: | |
|---|---|
| Description: | Five Falk employees stand inside the foundry. They stand among various gears and machinery. In the background, two more employees are visible. Original Fal... |
| Date: | |
|---|---|
| Description: | Several Falk employees at work in the machine shop where nearly each man attends to a piece of machinery. Original Falk caption reads, "Centennial historic... |
| Date: | 04 14 1956 |
|---|---|
| Description: | Two men simultaneously weld. According to an original Falk caption, "rough weight. 72000 pound est.-Unit was rough machine to with [sic]. 1/4 inch o... |
| Date: | 04 14 1956 |
|---|---|
| Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
| Date: | 06 06 1958 |
|---|---|
| Description: | A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ... |
| Date: | 10 08 1958 |
|---|---|
| Description: | Two male employees help transport a shipping shield. This shield was purchased by Stearns-Roger Company and used by Westinghouse. Original Falk caption rea... |
| Date: | 09 15 1966 |
|---|---|
| Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
| Date: | 05 17 1967 |
|---|---|
| Description: | BOF drive that was later purchased by Chicago Bridge and Iron Company and used by Crucible Steel of Midland, Pennsylvania. Falk caption reads, "Bull gear i... |
| Date: | 08 15 1967 |
|---|---|
| Description: | A roll on/roll off freighter is shown and was later purchased by Sun Shipbuilding. Falk caption reads, "Half strut for 646 single screw-roll on/roll off fr... |
| Date: | 05 1968 |
|---|---|
| Description: | Bull gear for a large shaft mounted BOF drive. Falk caption reads, "Finish cutting on Schiess hobber in Shop 4. Male employee in photograph is Erv Schneide... |
| Date: | 09 31 1968 |
|---|---|
| Description: | Split ring gear that is a component of a rod mill that was purchased by ACC-Vickers-Babcock Limited and then exported to India. Falk caption reads, "215 in... |
| Date: | 10 31 1968 |
|---|---|
| Description: | Split ring gear that was a later component of a rod mill was purchased by ACC-Vickers-Babcock Limited and exported to India. Original Falk caption reads, "... |
| Date: | 05 07 1969 |
|---|---|
| Description: | Pinion marine gear unit that served as a component for a Great Lakes Ore Carrier. This product was later purchased by General Motors-Electro Motive Divisio... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: