Search the Wisconsin Historical Society's collections
Search: falk
Search: corporation
Filter: Type of Photograph
Filter: Subject of transportation
Filter: Subject of metal industry
| Date: | 11 08 1961 |
|---|---|
| Description: | A prototype being tested in the research test lab of the Falk Corporation. Original Falk caption reads, "Temperature lube test, 8RT3 Prototype. Set up of l... |
| Date: | 07 24 1971 |
|---|---|
| Description: | Slewing drive that was purchased by the Dravo Corporation. Original Falk caption reads, "Slewing Drive-2 parts-(1) 19 feet 5 inches O.D. x 6 1/2 inch wide ... |
| Date: | 03 02 1956 |
|---|---|
| Description: | A seamless pipe fitting sits atop a railroad car, ready to be shipped. Later purchased and used by Elmes & Kings. Original Falk caption reads: "14' high-78... |
| Date: | 06 20 1966 |
|---|---|
| Description: | Falk caption reads, "A series of photos showing delivery of the first shipment of Radicon units direct from England to the port of Milwaukee. The series EG... |
| Date: | 10 28 1966 |
|---|---|
| Description: | Mill drive that was later purchased by Traylor Engineering and used by Hudson Cement. Original Falk caption reads, "See engineering files for exact descrip... |
| Date: | 07 18 1966 |
|---|---|
| Description: | Propeller of the S.S. Santa Cruz. Falk caption reads, "Photos taken for reference in study of propeller reversing characteristics for SUN Marine red... |
| Date: | 09 15 1966 |
|---|---|
| Description: | Falk caption reads, "Photos of ring gear to be displayed at the Association of Iron and Steel Engineers (AISE) show in Cleveland, Ohio, September 26th thro... |
| Date: | 09 08 1971 |
|---|---|
| Description: | This 2 pinion gear was purchased by the Fairbanks Morse Division of the Colt Industry and used by United States Steel. Falk caption reads, "Main propulsion... |
| Date: | 06 06 1977 |
|---|---|
| Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
| Date: | 03 1979 |
|---|---|
| Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
| Date: | 10 29 1968 |
|---|---|
| Description: | Mill drive purchased by Allis Chalmers and used by Duval. Original Falk caption reads, "260 inch x 34 inch single helical split ring gear... part of a phot... |
| Date: | 05 07 1969 |
|---|---|
| Description: | Marine gear unit ready to be shipped. This particular gear unit, a component of a Great Lakes Ore Carrier was purchased by General Motors-Electro Motive Di... |
| Date: | 02 14 1961 |
|---|---|
| Description: | Two men crouch atop of the large gear, while another stands at the side overseeing the lift. This gear was purchased and used by the Ladish Company of Cuda... |
| Date: | 05 23 1973 |
|---|---|
| Description: | Two employees, Bob Weiss and Clyde Tetzloff, attend to a drive that was purchased by Babcock and Wilcox Company and used by AEP Service Corporation. Falk c... |
| Date: | 01 19 1971 |
|---|---|
| Description: | View of a 29 foot in diameter ring gear that is a component of a ball mill drive on a truck. This ring gear was purchased by Koppers and used by Hannah Min... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: