Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 01 1973 |
---|---|
Description: | Aerial view of the Falk Corporation. Falk caption reads, "Black and white negatives, furnished to advertising department by J. Blank. See similar color pic... |
Date: | 08 1975 |
---|---|
Description: | Original Falk description reads, "Latest aerial views of the main plant taken by Robert McCoy." |
Date: | 11 08 1961 |
---|---|
Description: | A prototype being tested in the research test lab of the Falk Corporation. Original Falk caption reads, "Temperature lube test, 8RT3 Prototype. Set up of l... |
Date: | 11 25 1957 |
---|---|
Description: | A male employee operates a large machine at the Falk Corporation. The gear was purchased and used by the Falk Corporation. Original Falk caption reads: "Th... |
Date: | 04 10 1991 |
---|---|
Description: | Falk logo that reads, "Gearing for Tomorrow / Falk". |
Date: | 05 06 1980 |
---|---|
Description: | 48 inch clutch with spacer in the test lab at Falk. |
Date: | 05 23 1983 |
---|---|
Description: | Eugene Glover, a Falk employee, attends to several castings. Falk caption reads, "To be used in the new (1985) Foundry Capabilities Brochure." |
Date: | 07 03 1972 |
---|---|
Description: | Original Falk caption reads, "Record photos of Hobbing Machine number 252 in Shop 3." |
Date: | 07 16 1968 |
---|---|
Description: | Two speed increasers that were purchased and used by The Boeing Corporation/Vertol Division. Falk caption reads, "Test stand drives for helicopter componen... |
Date: | 10 25 1972 |
---|---|
Description: | Kiln pinion that was purchased by F.L. Smidth. Original Falk caption reads, "Grinding wheel touched shaft." |
Date: | 03 13 1974 |
---|---|
Description: | View of a gear test at Falk that is done to "show parallel alignment of hubs with unequal diameters."- according to original Falk caption. |
Date: | 03 13 1972 |
---|---|
Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photo taken in Shop 2." Male employee in photograph is Leonard Bartage... |
Date: | 03 01 1971 |
---|---|
Description: | Male employee, B. Schinto, inspecting according to original Falk caption, "a YQA element for use in bulletin 171-110." |
Date: | 05 08 1970 |
---|---|
Description: | Man welding a 0200R Mixco. Falk caption reads, "Shows stick welding of housing wrapper inside." |
Date: | 09 15 1966 |
---|---|
Description: | Eighteen foot split ring gear that is on display at the Falk Corporation. Falk caption reads, "Photos of ring gear to be displayed at Association of Iron a... |
Date: | 09 10 1969 |
---|---|
Description: | Special dual output shaft speed reducers that were purchased by the Edge Wallboard Machinery Company and used by the Abitibi Carolina Corporation. Falk cap... |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 09 14 1971 |
---|---|
Description: | View of a speed reducer that was purchased by the Kennedy Van Saun Corporation and used by Gresic Cement in Indonesia. Falk caption reads, "Design HP-3150,... |
Date: | 03 03 1956 |
---|---|
Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: