Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
Date: | 12 08 1972 |
---|---|
Description: | This unit was purchased and used by the the Aluminum Company of America. Falk caption reads, "8 units on the order. 3 units are shiftable, the balance of f... |
Date: | 06 28 1974 |
---|---|
Description: | Reverse drive that was purchased by Delaval Turbine and used by Bulk Food Carrier. Falk caption reads, "Largest of the "MR" type design made to date. Wides... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 01 10 1958 |
---|---|
Description: | Large propulsion gear that was later purchased by Bethlehem Steel Company and used by Hitachi Limited of Tokyo, Japan, as a replacement gear in the ship "S... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
Date: | 05 1965 |
---|---|
Description: | Pinion stand that was purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in the photograph is Jim Kolbeck. |
Date: | 06 23 1978 |
---|---|
Description: | View of an autogenous mill from above. This unit was purchased by Hardinge Company, a division of Koppers Incorporated and used by the Cleveland Cliff Empi... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 06 15 1956 |
---|---|
Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
Date: | 08 30 1965 |
---|---|
Description: | Man standing near spacer coupling that Chicago Bridge and Iron-East Chicago Industry later purchased and Inland Steel later used. Falk caption reads, "3340... |
Date: | 11 20 1968 |
---|---|
Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
Date: | 05 07 1969 |
---|---|
Description: | This product was purchased by General Motors-Electro Motive Division and used by Litton Industries as a Great Lakes Ore Carrier. Falk caption reads, "Port ... |
Date: | 01 20 1969 |
---|---|
Description: | Gas turbine test stand drive that was purchased and used by Pratt and Whitney Aircraft Division. Original Falk caption reads, "Two special units and ratio ... |
Date: | |
---|---|
Description: | Milwaukee streetcar and its passengers. Original Falk caption reads, "Photos borrowed from Milwaukee County Transport for use in brochure 850801. Originals... |
Date: | |
---|---|
Description: | Front end of a streetcar on a Milwaukee street. Original Falk caption reads, "Photos borrowed from Milwaukee County Transport for use in brochure 850801. O... |
Date: | 11 11 1985 |
---|---|
Description: | Original Falk caption reads, "Coal handling tower resources. All product taken by Jim Nowicki, local photographer." |
Date: | 06 16 1969 |
---|---|
Description: | Paper mill debarker drum that was purchased and used by the Manitowoc Shipbuilding Company. Man in photograph is unidentified. |
Date: | 02 26 1973 |
---|---|
Description: | View of the Burgmaster Machine in Shop 3. Male employee in photograph is Kem Megal. |
Date: | 1945 |
---|---|
Description: | Man in protective gloves and masked helmet against heat and flame works on heavy machinery at the Falk Corporation, known for production of industrial gear... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: