Date: | |
---|---|
Description: | A T.M.E.R. and L Company streetcar is stopped on Washington Avenue, with the two streetcar operators aboard. The advertisement on the streetcar reads, "190... |
Date: | |
---|---|
Description: | Three male employees appear to be preparing for a casting in sand. One man holds a hose in his hand while another has a shovel and the other a long metal p... |
Date: | 02 17 1959 |
---|---|
Description: | A male employee inspects the ring gear which was later purchased by F.L. Smidth and Company of New York, New York, and used by St. Lawrence Cement Company ... |
Date: | 03 02 1971 |
---|---|
Description: | A male employee, Bill Hoppe, attends to a special cutter head drive. This product was purchased and used by the Great Lakes Dredge and Dry Dock company. Fa... |
Date: | 03 10 1975 |
---|---|
Description: | Marine drive that was a later component of a Great Lakes bulk carrier. This unit was purchased by the Electro Motive division of the General Motors Company... |
Date: | 03 10 1975 |
---|---|
Description: | Marine drive that was a later component of a Great Lakes bulk carrier. This unit was purchased by the Electro Motive division of the General Motors Company... |
Date: | 08 31 1974 |
---|---|
Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
Date: | 04 25 1975 |
---|---|
Description: | Non-reversing marine drive that was a later component of a 800 foot Great Lakes bulk carrier. This unit was purchased by the Electro Motive Division of the... |
Date: | 04 18 1957 |
---|---|
Description: | This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p... |
Date: | 08 20 1973 |
---|---|
Description: | View of a combination reducer/pinion that is a component of a roughing mill for steel. This unit was purchased and used by the Eastern Carolina Steel Divis... |
Date: | 06 07 1963 |
---|---|
Description: | Single large helical hub gear that was a component of an oxygen furnace drive. This gear was purchased by Morgan Engineering Company and used by Pittsburgh... |
Date: | 08 09 1957 |
---|---|
Description: | A large Drive Gear rests outside the factory after being removed from the furnace. This product was later purchased by Buffalo Forge Company of Buffalo, Ne... |
Date: | 10 18 1974 |
---|---|
Description: | Overhead view of a mixing fermenter that was later purchased by the Mixing Equipment Company Incorporated and used by Italproteine of Sardinia, Italy. Orig... |
Date: | 08 31 1974 |
---|---|
Description: | Twin pinion marine red gear that was used by The Offshore Company for the Discoverer 534, a deep ocean drilling rig. Original Falk caption reads, "Propulsi... |
Date: | 11 05 1959 |
---|---|
Description: | Two male employees operate a large factory machine. |
Date: | 04 19 1957 |
---|---|
Description: | A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company.... |
Date: | 04 26 1966 |
---|---|
Description: | Three men with bevel gear and pinion that was later used in a Rotary Hearth Furnace drive. This gear was purchased by Surface Comb. Division of Midland Ros... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: