Search the Wisconsin Historical Society's collections
Search: falk
Filter: Type of Photograph
Filter: Subject of machinery
| Date: | |
|---|---|
| Description: | Three Falk employees stand inside of the Falk factory. Around them are various steel beams, machines, and tools. Original Falk caption reads, "Centennial h... |
| Date: | 05 23 1983 |
|---|---|
| Description: | Eugene Glover, a Falk employee, attends to several castings. Falk caption reads, "To be used in the new (1985) Foundry Capabilities Brochure." |
| Date: | 03 13 1974 |
|---|---|
| Description: | View of a gear test at Falk that is done to "show parallel alignment of hubs with unequal diameters."- according to original Falk caption. |
| Date: | 1963 |
|---|---|
| Description: | Two unidentified Falk employees inspect a large gear. Original Falk caption reads, "Centennial historical photos of old negative which could be lost foreve... |
| Date: | 01 1973 |
|---|---|
| Description: | Aerial view of the Falk Corporation. Falk caption reads, "Black and white negatives, furnished to advertising department by J. Blank. See similar color pic... |
| Date: | 03 13 1972 |
|---|---|
| Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photo taken in Shop 2." Male employee in photograph is Leonard Bartage... |
| Date: | 1985 |
|---|---|
| Description: | Alex Ostrowski, a Falk employee, demonstrates how the Risser-cut-off equipment is used. Original Falk caption reads, "Taken to illustrate foundry Risser-cu... |
| Date: | 05 06 1980 |
|---|---|
| Description: | 48 inch clutch with spacer in the test lab at Falk. |
| Date: | 05 18 1970 |
|---|---|
| Description: | Falk caption reads, "Photo taken for publicity release and forum. Men in photo from left to right are D.K. Lambert-Director of International Sales at Falk,... |
| Date: | 08 08 1973 |
|---|---|
| Description: | Original Falk caption reads, "These pictures of Machine number 7409 taken for Jack Blank to use as illustration(s) of Falk slotter to gain approval to use ... |
| Date: | 08 08 1973 |
|---|---|
| Description: | Original Falk caption reads, "These pictures of machine number 7409 for Jack Blank to use as illustration of a Falk slotter to gain approval to use a simil... |
| Date: | 03 03 1956 |
|---|---|
| Description: | Two long-time Falk employees, Bob Quitzow and Frank Ruscitti, work in the gas cutting department. Original Falk caption reads: "View of 'Bug' cutting Depar... |
| Date: | 06 06 1958 |
|---|---|
| Description: | A male employee oversees the testing of a Lewellen Commercial Variator in the test lab at Falk. |
| Date: | 03 01 1971 |
|---|---|
| Description: | Male employee, B. Schinto, inspecting according to original Falk caption, "a YQA element for use in bulletin 171-110." |
| Date: | 07 03 1972 |
|---|---|
| Description: | Original Falk caption reads, "Record photos of Hobbing Machine number 252 in Shop 3." |
| Date: | 11 1976 |
|---|---|
| Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
| Date: | 03 31 1905 |
|---|---|
| Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
| Date: | 07 31 1978 |
|---|---|
| Description: | Theodore A. Lutzen, a Falk employee, guides a pipe cap as it is being lowered. This unit was purchased by Vulcan Iron Works. Original Falk caption reads, "... |
| Date: | 03 13 1972 |
|---|---|
| Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photograph was taken in the Heat Treat Department." Male employees in ... |
| Date: | 02 23 1976 |
|---|---|
| Description: | Bill Wagner, a Falk employee, attends to a large coupling sleeve. This unit was later used by the Auburn Plant-Baush Drill Press. Original Falk caption rea... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: