Search the Wisconsin Historical Society's collections
Filter: Categories of Wisconsin Historical Images
Filter: Subject of Metal trade
Filter: Subject of machinery
| Date: | 05 1976 |
|---|---|
| Description: | View of a FPD product cut that was a later component of a stacker drive. This particular unit was purchased by Jervis B. Webb and was exported to South Ame... |
| Date: | 08 20 1976 |
|---|---|
| Description: | A male employee, Don Ferch, attends to a pulverizer mill. This unit was purchased by the Foster Wheeler Energy Corporation and used by the Public Service o... |
| Date: | 09 22 1976 |
|---|---|
| Description: | William Rhody, a Falk employee, inspects a 2 piece trunnion. This particular unit was purchased by F.L. Smidth. Original Falk caption reads, "Trunnion-two ... |
| Date: | 11 1976 |
|---|---|
| Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
| Date: | 01 26 1977 |
|---|---|
| Description: | A Falk employee, George Cira, inspects the components of a later ejection box. This unit was purchased by Central Foundry, a division of the General Motors... |
| Date: | 02 04 1977 |
|---|---|
| Description: | A Falk employee, John Bartaczewicz, inspects a large inlet head. This particular unit was purchased by F.L. Smidth and Company. Original Falk caption reads... |
| Date: | 03 1977 |
|---|---|
| Description: | This particular unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Company of the Tilden II Mine. |
| Date: | 03 18 1977 |
|---|---|
| Description: | This unit was purchased by the Ford Motor Company. Original Falk caption reads, "Cover die holder block: pattern number 45ZW-51A, approximate weight 25,400... |
| Date: | 06 1977 |
|---|---|
| Description: | A male employee, Michael Nycz, attends to a pulverizer mill that is a later component of a coal pulverizer. This unit was purchased by Foster Wheeler and u... |
| Date: | 06 06 1977 |
|---|---|
| Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
| Date: | 06 06 1977 |
|---|---|
| Description: | Elevated view of a kiln drive that was purchased and used by Dravo Line. Original Falk caption reads, "Color view of May 1977 Pit and Quarry. Photos sent t... |
| Date: | 07 1977 |
|---|---|
| Description: | Norbert Winski, a Falk employee, attends to a large vertical roller mill. This unit was purchased by the Fuller Company and used by the Gresik Cement Compa... |
| Date: | 1978 |
|---|---|
| Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
| Date: | 07 1977 |
|---|---|
| Description: | Duane Hanson and Norbert Winski attend to a large reducer and incher. This unit was purchased by Allis Chalmers and used by the Cleveland Cliffs Iron Compa... |
| Date: | 10 04 1977 |
|---|---|
| Description: | William Rhody, a Falk employee, inspects a large, floating trunnion. This particular unit was purchased by Humboldt-Wedag. Original Falk caption reads, "Fi... |
| Date: | 01 17 1978 |
|---|---|
| Description: | William Kozlowski, a Falk employee, inspects a centrifugal compressor. This particular unit was purchased and used by the Cities Service Oil Company. |
| Date: | 02 20 1978 |
|---|---|
| Description: | Anotha Burt, a Falk employee, inspects a large walk gear. This particular gear was purchased by Page Engineering. Original Falk caption reads, "Large walk ... |
| Date: | 03 03 1978 |
|---|---|
| Description: | Art Hirt, a Falk employee, inspects a large mixer drive. This unit was purchased by the Mixing Equipment Company. Original Falk caption reads, "Picture tak... |
| Date: | 03 1979 |
|---|---|
| Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
| Date: | 04 18 1978 |
|---|---|
| Description: | This unit was purchased by the Ford Motor Company. Original Falk caption reads, "Cover die block: pattern number 7814-1, approximate weight 38,560 pounds, ... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: