Search the Wisconsin Historical Society's collections

Searching for

Refine by

Results 1-20 of 169

Photograph

Testing Room at International Harvester's Milwaukee Works

Date: 02 1907
Description: Workers look on as machine parts are tested at International Harvester's Milwaukee Works. This photograph was displayed at the 1915 Panama-Pacific Internat...
Photograph

Worker in front of Furnace at IHC McCormick Works

Date: 09 1908
Description: View of worker with a grey beard and hat standing and posing in front of a furnace inside IHC McCormick Works foundry.
Photograph

Machine Operator at Indianapolis Works

Date: 10 1938
Description: Factory worker using a lathe at International Harvester's Indianapolis Truck Engine Works. Original caption reads: "LeBlond crankshaft lathe showing detail...
Photograph

Worker Washes Engine Blocks at Indianapolis Works

Date: 10 1938
Description: Factory operator washing motor truck engine blocks at International Harvester's Indianapolis Motor Truck Works. Original caption reads: "A Blakeslee washin...
Photograph

Worker Inspects Pistons at Indianapolis Works

Date: 10 1938
Description: Worker inspecting pistons at International Harvester's Indianapolis Motor Truck Engine Works. Original caption reads: "An inspection operation on the wrist...
Photograph

Nagle-Hart Co. Machine Shop

Date: 08 18 1943
Description: A workman grinds a cylinder head at Nagle-Hart Tractor & Equipment Company, 754 East Washington Avenue.
Photograph

Two Men Packaging Vacuum Chuck

Date: 04 14 1956
Description: View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli...
Photograph

Large Cement Kiln

Date: 08 24 1956
Description: Purchased by Allis Chalmers and used by the Marquette Cement Company, original Falk caption reads:"M.O. NO. 5541-0574 & 5520-7424. Type of Unit, 12 1/2 GDA...
Photograph

Screw Press Washers

Date: 02 14 1957
Description: A male employee stands near a screw press washer. The speed reducer shown is a Right Angle, Double Red. Later purchased and used by the American Boxboard C...
Photograph

Man with Drive Pinion and Gear

Date: 03 13 1957
Description: Described by the orginial Falk caption with "91 teeth, .77039 DP, 12 inch Face Meshes with 15 tooth pinion. Gear is shown on Drawing 317096 and Pinion on 2...
Photograph

Man Measuring Drive Gear

Date: 04 03 1957
Description: Man measuring Drive Gear that was later purchased by Foster Wheeler Corporation and used by Pennsylvania Power & Light Company of Sunbury Station, Shamokin...
Photograph

Employee Standing Near Roll Drive Pinion

Date: 04 18 1957
Description: This roll drive pinion was purchased by E.W. Bliss Co of Salem, Ohio, and later used by Empire Steel Company. Falk original caption reads: "Forging being p...
Photograph

Man Oversees Roll Drive Pinion

Date: 04 19 1957
Description: A man oversees the manufacturing process of a roll drive pinion which was purchased by E.W. Bliss Company of Salem, Ohio, and used by Empire Steel Company....
Photograph

H.S. Grigate Gear

Date: 04 30 1958
Description: A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy.
Photograph

Commercial Variator

Date: 06 06 1958
Description: A male employee oversees the testing of a Lewellen Commercial Variator in the test lab at Falk.
Photograph

Shipping Shield

Date: 06 06 1958
Description: A male employee stands next to a large shipping shield. This shield was purchased by Stearns-Rogers and used by Westinghouse. Original Falk caption reads, ...
Photograph

Transporting a Shipping Shield

Date: 10 08 1958
Description: Two male employees help transport a shipping shield. This shield was purchased by Stearns-Roger Company and used by Westinghouse. Original Falk caption rea...
Photograph

Two Men Inspecting a Gear

Date: 11 21 1958
Description: Two men inspect a large gear which was later purchased by DeLaval Steam Turbine Company of Trenton, New Jersey. Original Falk caption reads, "This gear is ...
Photograph

Ring Gear Casting

Date: 01 16 1959
Description: Two men guide cement blocks that comprise a casting for a gear that will be used in a cement kiln. The final gear was later purchased by F.L. Smidth and Co...
Photograph

Man Inspecting Ring Gear

Date: 02 17 1959
Description: A male employee inspects the ring gear which was later purchased by F.L. Smidth and Company of New York, New York, and used by St. Lawrence Cement Company ...

Have Questions?

If you didn't find the material you searched for, our Library Reference Staff can help.

Call our reference desk at 608-264-6535 or email us at: