Date: | 1910 |
---|---|
Description: | Male and female office workers inside International Harvester's Osborne Twine Mill. The Osborne Works was located at 5 Pulaski Street, and was owned and op... |
Date: | 12 20 1943 |
---|---|
Description: | Jerry Moreland tests a front drive joint assembly in a freezing cabinet at the International Harvester truck engineering department. The original caption r... |
Date: | 1944 |
---|---|
Description: | Men sit behind desks in the drafting room of International Harvester Company's farm machinery engineering department. The original caption reads: "A portio... |
Date: | 1935 |
---|---|
Description: | John Seltzer (left) and T.C. Phillips examine a blueprint in the Engineering Department of International Harvester's Fort Wayne Works. |
Date: | 1935 |
---|---|
Description: | Charles W. Gilden sits at a desk in the Fort Wayne Works Engineering Department while Paul T. Brantingham stands next to him. |
Date: | 1941 |
---|---|
Description: | Milwaukee Works foremen and supervisors posing in front of a "high-speed, modernized gun carriage." At the right is Superintendent V.A. Guebard, and next t... |
Date: | 1937 |
---|---|
Description: | A man carrying a box exits the passenger side of an International D-2 panel truck used by the Singer Sewing Machine Company. The text on the box reads: "Si... |
Date: | 1938 |
---|---|
Description: | D.W. Norred (left), International Shreveport branch, Roy Foster, switchman of the Rajo Oil Corporation, and Jack Anderson of Jack Anderson Company, an Inte... |
Date: | 1966 |
---|---|
Description: | Students converse with a International Harvester engineer Ted Ornas during the first styling seminar at the Fort Wayne motor truck engineering department. ... |
Date: | 1966 |
---|---|
Description: | International Harvester engineer Ted Ornas with a group of students at the company's first styling seminar at the Fort Wayne motor truck engineering depart... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas and a student discuss the building of a "Multipurpose Safety Utility Vehicle" during International Harvester's first styling seminar ... |
Date: | 1966 |
---|---|
Description: | IH engineer Ted Ornas consults with a student in International Harvester's first styling seminar at the Fort Wayne motor truck engineering department. Anot... |
Date: | 1935 |
---|---|
Description: | D.G. Renno (left) and H.K. Reinoehl look over blueprints in the Engineering Department at International Harvester's Ft. Wayne Works. |
Date: | 1970 |
---|---|
Description: | Two men, both clay modelers, start work on proposal for 1970 F4370 TranStar. They are adding clay to a wood frame in rough design, in order to achieve the ... |
Date: | |
---|---|
Description: | Full-length portrait of Brooks McCormick sitting in a chair holding a gold pen in his right hand. On a table beside him is a red toy dump truck. A large ma... |
Date: | |
---|---|
Description: | Sid sitting and posing by the print dryer near the darkroom at Gisholt with a cigar in his mouth. |
Date: | |
---|---|
Description: | Sid sleeping on the floor near a desk in the darkroom at Gisholt with a cigar in his mouth. His legs are crossed and his head is resting on a cardboard box... |
Date: | |
---|---|
Description: | Sid is holding a cigar in his hand while sitting on the floor in the darkroom at the Gisholt Factory on a piece of paper near a sink, looking as if he just... |
Date: | 12 1968 |
---|---|
Description: | Sid posing next to the print dryer in the printing room near the darkroom at Gisholt Machine Company. He has his signature cigar, holding it to his mouth. ... |
Date: | |
---|---|
Description: | Sid posing in the printing room near a darkroom at Gisholt Machine Company. He is wearing a long-sleeved white shirt with a patterned bow tie. A print drye... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: