Date: | 11 20 1968 |
---|---|
Description: | Gear coupling that was later purchased by Mesta Machine and used by Republic Steel. Original Falk caption reads, "84 inch hot strip mill, 300 G sleeve bein... |
Date: | 11 25 1968 |
---|---|
Description: | Dry dock hoist drive that is a component of a Pearlson Syncrolift. This product was later purchased by Pearlson Engineering. Original Falk caption reads, "... |
Date: | 01 06 1969 |
---|---|
Description: | Original Falk caption reads, "General view of the pattern shop taken as part of Allis Chalmers-Duval." Photo series for Bill Wyse. The core box in the fore... |
Date: | 01 02 1969 |
---|---|
Description: | Original Falk caption reads, "25G sleeve internal teeth being machined on Fellows machine number 7347 in Shop 4." Man in photograph is Henry Lemmermann." |
Date: | 05 07 1969 |
---|---|
Description: | This product was purchased by General Motors-Electro Motive Division and used by Litton Industries as a Great Lakes Ore Carrier. Falk caption reads, "Port ... |
Date: | 06 16 1969 |
---|---|
Description: | View of a cam that is a component of a 185 cubic yard Walkray Dragline that was purchased and used by Bucyries-Erie Company. An individual cam weight 51,20... |
Date: | 05 23 1973 |
---|---|
Description: | Two employees, Bob Weiss and Clyde Tetzloff, attend to a drive that was purchased by Babcock and Wilcox Company and used by AEP Service Corporation. Falk c... |
Date: | 03 31 1905 |
---|---|
Description: | An unidentified Falk employee stands next to a large Steel Spur Gear. The sign in the photograph reads: "Cast Steel Spur Gear. Made by The Falk Co. Milwauk... |
Date: | 12 20 1943 |
---|---|
Description: | Men working in the sheet metal shop of the farm machinery engineering department of the International Harvester Company. The original caption reads: "Part ... |
Date: | 06 06 1977 |
---|---|
Description: | Tim Wollenziehr, a Falk employee drives a fork-lift carrying an inching drive, a later component of a coal pulverizer. This unit was purchased by Babcock a... |
Date: | 1978 |
---|---|
Description: | Lynnette Hartwig, a Falk employee, inspects a gear. This unit was later purchased by the Wisconsin Bearing Company. Original Falk caption reads: "Illustrat... |
Date: | 03 1979 |
---|---|
Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
Date: | 07 22 1936 |
---|---|
Description: | A factory worker at McCormick Works uses a hydraulic press to straighten malleable castings. |
Date: | 1944 |
---|---|
Description: | A man wearing protective gloves is shoveling metal pieces into a radiant tube clean hardening furnace at West Pullman Works. |
Date: | 11 20 1925 |
---|---|
Description: | Two factory workers use long-handled tongs to handle a long piece of heated metal at the McCormick Works factory. |
Date: | 11 03 1941 |
---|---|
Description: | A factory worker operates a forge hammer at International Harvester's Canton Works. Original caption reads: "Shell Package Case Stops, Canton Works. Forge ... |
Date: | 11 03 1941 |
---|---|
Description: | A factory worker trims forgings at International Harvester's Canton Works. Original caption reads: "Shell Package Case Stops, Canton Works. This operation ... |
Date: | 1941 |
---|---|
Description: | Factory workers producing artillery shells at International Harvester's Milwaukee Works. Original caption reads: "75-Millimeter Shell Manufacture. First op... |
Date: | 1941 |
---|---|
Description: | Factory worker producing artillery shells at International Harvester's West Pullman Works. Original caption reads: "37-Millimeter Shell Manufacture. The fo... |
Date: | 1910 |
---|---|
Description: | An early Pawling and Harnischfeger cab-operated crane with dial operated controllers and a 5-ton type "O" bridge with a type "A" trolley. The operator is i... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: