Date: | |
---|---|
Description: | Interior forward view of a Fairchild 71 cabin showing instrument board, engine controls, and control stick. The mirror over the instrument board allows the... |
Date: | |
---|---|
Description: | Three-quarter view from front left of a Fokker F-VII Trimotor sitting on a runway. The wing identifier reads: "N-3314." The airplane is owned by commercial... |
Date: | 11 17 1928 |
---|---|
Description: | Three-quarter view from front left of a 1928 Keystone-Loening Air Yacht C2-H sitting on a runway. This amphibious plane is powered by a 525 hp Pratt & Whit... |
Date: | 1919 |
---|---|
Description: | Interior view of the Lawson plant. At least 18 people are working in the large, open room. Belt-driven machinery is attached to the rafters of the open cei... |
Date: | 1919 |
---|---|
Description: | Interior of the Lawson machine shop, with two Lawson engines, one housed in part of a fuselage, the other set on a wooden support. A long wooden frame is i... |
Date: | 1917 |
---|---|
Description: | Close-up view of the pilot's seat at the front of a Lawson Military Tractor 2 (MT2). The plane's structure is intact but exterior plates have not yet been ... |
Date: | 1919 |
---|---|
Description: | A Lawson Air Liner parked near a hangar. Men in uniforms are in the background, and suggest this could be a military base. Several people are standing near... |
Date: | 1919 |
---|---|
Description: | Three-quarter view from front right of a Lawson Air Liner parked near a hangar, with a group of men in military uniforms inspecting it. A woman in a white ... |
Date: | |
---|---|
Description: | Standard type of Gisholt Vertical Boring and Turning Mills manufactured as 52, 60, 64, and 72 inches. Gisholt was the first company to specialize in heavy ... |
Date: | 01 13 1943 |
---|---|
Description: | Male and female workers producing torpedo parts at an International Harvester factory. Original caption reads: "A battery of acetylene torches is here show... |
Date: | |
---|---|
Description: | Aerial left side view of an American Eagle Model A-101 in flight at the same elevation of the airplane in the foreground. The pilot is in the front cockpit... |
Date: | |
---|---|
Description: | Three-quarter view from front left of a Fokker Super Universal sitting on a runway. The tail identifier reads: "NC 4453." Printed on the side of the airpla... |
Date: | |
---|---|
Description: | Right side view of a Fokker F-VII Trimotor in flight. The wing identifier read: "1985." This airplane, called the "Southern Cross," was flown in the spring... |
Date: | |
---|---|
Description: | Three-quarter view from front right of a Ford 4-AT-B Trimotor sitting on a runway. The tail identifier reads: "NX 4542." This airplane was one of three use... |
Date: | |
---|---|
Description: | Right side view of a Sikorsky S-38A sitting on a runway. The tail identifier reads: "NC8019." Five passengers and one crew member can be seen through the w... |
Date: | |
---|---|
Description: | Front view of a Sikorsky S-35 sitting on a runway. The S-35 is powered by three 420 hp Gnôme-Rhône Jupiter engines. Two men are working on the plane: one i... |
Date: | |
---|---|
Description: | Gisholt Standard Turret Lathe. The metal stamp states: "Gisholt Machine Co. Madison, Wis., U.S.A." Gisholt was the first company to specialize in heavy typ... |
Date: | |
---|---|
Description: | Gisholt Standard Turret Lathe. The metal stamp states: "Gisholt Machine Co. Madison, Wis., U.S.A." Gisholt was the first company to specialize in heavy typ... |
Date: | |
---|---|
Description: | Right side view of a Sikorsky S-31, equipped with a 200hp Wright J-4 engine, sitting on a runway. These models were bought by Fairchild Co. to be used for ... |
Date: | 12 21 1927 |
---|---|
Description: | Three-quarter view from left rear of a Keystone X.L.B-6 "Panther" sitting on a runway. The LB-6 models (including X.L.B-6) were light bombers produced for ... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: