Date: | 11 15 1982 |
---|---|
Description: | Mel Zdroik, a Falk employee, attends to a copper ore conveyor that was used by the Codelco Company of Chile, South America. Original Falk caption reads, "P... |
Date: | 09 15 1966 |
---|---|
Description: | 240P double piloted coupling. This coupling helps compile the centrifugal pump that was purchased by Foster Wheeler Corporation and later used by Commonwea... |
Date: | 09 12 1985 |
---|---|
Description: | Shovel base in the Falk foundry. This particular unit was purchased and used by Bucyrus Erie. Original Falk caption reads, "First job on VBM. Large weldmen... |
Date: | |
---|---|
Description: | Six Falk employees stand in machine shop. There are numerous machines and gear implements surrounding them. Original Falk caption reads, "Centennial histor... |
Date: | |
---|---|
Description: | Three Falk employees attend to a large machine in the foundry. Original Falk caption reads, "Centennial historical photos of old negative which could be lo... |
Date: | |
---|---|
Description: | Three Falk employees stand with a large gear in the foundry. Original Falk caption reads, "Centennial historical photos of old negative which could be lost... |
Date: | 05 1965 |
---|---|
Description: | TCD drives that were purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Falk caption reads, "Various manufacturing and assembly phot... |
Date: | 08 29 1967 |
---|---|
Description: | Falk caption reads, "Forward end view of partially assembled unit; shows quill shaft bearings and clutch drive discs." The final product was purchased by S... |
Date: | 09 10 1968 |
---|---|
Description: | Mill drive that was later purchased by Allis Chalmers and used by Duval. Falk caption reads, "Photo of turning large ring gear O.D. no Schiess Mill in Shop... |
Date: | 08 15 1971 |
---|---|
Description: | This drive was purchased by Paceco. Falk caption reads, "2197Z2 speed reducer, for SL7-Paceco Portainer Cranes... this unit ratio 25.516:1, input 650 rpmm ... |
Date: | 10 08 1971 |
---|---|
Description: | This product was purchased by Allis-Chalmers of West Allis, Wisconsin. Falk caption reads, "Solid riding ring 102,000 pound rough weight, 244 inches in dia... |
Date: | 12 08 1972 |
---|---|
Description: | This unit was purchased and used by the the Aluminum Company of America. Falk caption reads, "8 units on the order. 3 units are shiftable, the balance of f... |
Date: | 06 28 1974 |
---|---|
Description: | Reverse drive that was purchased by Delaval Turbine and used by Bulk Food Carrier. Falk caption reads, "Largest of the "MR" type design made to date. Wides... |
Date: | 07 1975 |
---|---|
Description: | A male employee, Harold Ladwig, welds an area on a worm gear. Original Falk caption reads, "A series of pictures taken in Weld Shop to illustrate steps in ... |
Date: | 01 10 1958 |
---|---|
Description: | Large propulsion gear that was later purchased by Bethlehem Steel Company and used by Hitachi Limited of Tokyo, Japan, as a replacement gear in the ship "S... |
Date: | 04 30 1958 |
---|---|
Description: | A male employee inspects a H.S. Grigate Gear. This gear, a marine propulsion drive, was later used by the United States Navy. |
Date: | 05 1965 |
---|---|
Description: | Pinion stand that was purchased by U.S. Steel (Allegheny Project) and used by Gary Steel Works. Male employee in the photograph is Jim Kolbeck. |
Date: | 06 23 1978 |
---|---|
Description: | View of an autogenous mill from above. This unit was purchased by Hardinge Company, a division of Koppers Incorporated and used by the Cleveland Cliff Empi... |
Date: | 04 14 1956 |
---|---|
Description: | View of the manufacturing process of vacuum chucks. Used for skin milling, this particular order, according to an original Falk caption, "covers four dupli... |
Date: | 06 15 1956 |
---|---|
Description: | Single helical mills gear that was later purchased by Nordberg and used by Universal Atlas Cement Company of Milwaukee. Original Falk caption reads: "23/29... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: