Date: | 08 08 1973 |
---|---|
Description: | Original Falk caption reads, "These pictures of Machine number 7409 taken for Jack Blank to use as illustration(s) of Falk slotter to gain approval to use ... |
Date: | 08 08 1973 |
---|---|
Description: | Original Falk caption reads, "These pictures of machine number 7409 for Jack Blank to use as illustration of a Falk slotter to gain approval to use a simil... |
Date: | 08 24 1971 |
---|---|
Description: | View of a 13 foot diameter hub gear that is a later component of a basic oxygen furnace drive. This gear was purchased and used by the Bethlehem Steel Corp... |
Date: | 04 15 1971 |
---|---|
Description: | Male employee, Timothy Burton, inspecting a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R. Squibb and Sons. ... |
Date: | 12 02 1963 |
---|---|
Description: | An employee stands near a cross rail that was later purchased by Onnsud Machine Works and used by Avco Corporation for cargo planes. Falk caption reads,"Ma... |
Date: | 07 22 1970 |
---|---|
Description: | Large mill drive that was purchased by Koppers Corporation and used by Hanna Mining. Original Falk caption reads, "Large ring gear made to 1970. First ring... |
Date: | 09 15 1971 |
---|---|
Description: | This product was purchased by the Kennedy Van Saun Corporation and used by Gresic Cemenent of Indonesia. Original Falk caption reads, "Design HP- 3150, ser... |
Date: | 03 13 1972 |
---|---|
Description: | Original Falk caption reads, "Largest bevel gears manufactured by Falk to date. This photograph was taken in the Heat Treat Department." Male employees in ... |
Date: | 02 23 1976 |
---|---|
Description: | Bill Wagner, a Falk employee, attends to a large coupling sleeve. This unit was later used by the Auburn Plant-Baush Drill Press. Original Falk caption rea... |
Date: | 06 12 1968 |
---|---|
Description: | Bull gear for shaft on a BOF Drive. This gear was later purchased by Pennsylvania Engineering Corporation and used by Youngstown Sheet and Tube. Falk capti... |
Date: | 09 16 1968 |
---|---|
Description: | A cement mill drive that was manufactured in the Speed Reducer Department of the Falk Corporation. This drive was later purchased by Fuller Company and use... |
Date: | 03 26 1971 |
---|---|
Description: | Original Falk caption reads, "Dynamic balancing of a YQA element for use in YQA bulletin 171-110." Male employee in photograph is Edward Rhys. |
Date: | 07 16 1968 |
---|---|
Description: | Special speed increasers that were purchased and used by The Boeing Corporations Vertol Division. Falk caption reads, "Test stand drives for helicopter com... |
Date: | 07 31 1978 |
---|---|
Description: | Theodore A. Lutzen, a Falk employee, guides a pipe cap as it is being lowered. This unit was purchased by Vulcan Iron Works. Original Falk caption reads, "... |
Date: | 1963 |
---|---|
Description: | Two unidentified Falk employees inspect a large gear. Original Falk caption reads, "Centennial historical photos of old negative which could be lost foreve... |
Date: | 09 01 1973 |
---|---|
Description: | View of a 200T10 coupling. Falk caption reads, "Photo taken for possible use in T10 service manual. Photos show proper installation procedure." |
Date: | 02 26 1973 |
---|---|
Description: | Original Falk caption reads, "Type 'F' unit housings. View of portage inspection machine in Shop 1." Male employee in photograph is Donald L. Vogt. |
Date: | |
---|---|
Description: | Three Falk employees stand inside of the Falk factory. Around them are various steel beams, machines, and tools. Original Falk caption reads, "Centennial h... |
Date: | 04 15 1971 |
---|---|
Description: | View of a male employee, Walter Drolhr, attending to a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R Squibb ... |
Date: | 11 1976 |
---|---|
Description: | Two Falk employees, Arthur Hirt on the left, and Karl Becker on the right, attend to a large gear. This particular unit was purchased and used by United St... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: