Date: | 01 17 1978 |
---|---|
Description: | William Kozlowski, a Falk employee, inspects a centrifugal compressor. This particular unit was purchased and used by the Cities Service Oil Company. |
Date: | 02 20 1978 |
---|---|
Description: | Anotha Burt, a Falk employee, inspects a large walk gear. This particular gear was purchased by Page Engineering. Original Falk caption reads, "Large walk ... |
Date: | 03 03 1978 |
---|---|
Description: | Art Hirt, a Falk employee, inspects a large mixer drive. This unit was purchased by the Mixing Equipment Company. Original Falk caption reads, "Picture tak... |
Date: | 03 1979 |
---|---|
Description: | James Blaesius, a Falk employee, operates a fork-lift that carries a component of a conveyor drive. This unit was purchased by Kaisers Engineers and used b... |
Date: | 04 18 1978 |
---|---|
Description: | This unit was purchased by the Ford Motor Company. Original Falk caption reads, "Cover die block: pattern number 7814-1, approximate weight 38,560 pounds, ... |
Date: | 06 1978 |
---|---|
Description: | Original Falk caption reads, "A series of photos to illustrate various manufacturing operations for future publications: Also color for slide talks." Male ... |
Date: | 06 23 1978 |
---|---|
Description: | View of an autogenous mill from above. This unit was purchased by Hardinge Company, a division of Koppers Incorporated and used by the Cleveland Cliff Empi... |
Date: | 07 31 1978 |
---|---|
Description: | Theodore A. Lutzen, a Falk employee, guides a pipe cap as it is being lowered. This unit was purchased by Vulcan Iron Works. Original Falk caption reads, "... |
Date: | 10 24 1978 |
---|---|
Description: | Gerald Gosetti, a Falk employee, inspects a large vertical roller mill. This particular mill was purchased by combustion engineering and used by Marquette ... |
Date: | 11 06 1978 |
---|---|
Description: | Melvin Zdroik, a Falk employee, attends to a large vertical roller mill that is a later component of a L.S. Shaft and Gear. This unit was purchased by Comb... |
Date: | 11 29 1978 |
---|---|
Description: | Melvin E. Rew attends to a large flange for a mill head. This unit was purchased by Humbolt Wedag and used by Kaiser. |
Date: | 11 29 1978 |
---|---|
Description: | This unit was purchased by Humbolt Wedag and used by Kaiser. |
Date: | 04 25 1979 |
---|---|
Description: | A large single helical ring gear hangs from the ceiling in the Falk factory. This later component of a kiln drive was purchased by Allis Chalmers and used ... |
Date: | 05 1979 |
---|---|
Description: | Non-reversing marine gear that is a component of a marine propulsion drive. This unit was purchased by the Electro-Motive division of the General Motors Co... |
Date: | 05 1979 |
---|---|
Description: | Original Falk caption reads, "General run of the mine large ring gears in various stages of manufacture waiting for subsequent machining operations. This s... |
Date: | 04 1980 |
---|---|
Description: | Two men, Ervin Kasper and A. Chirello, attend to a large hoist drive. This unit was purchased by GHH Sterkrade and used by Union Oil/Molycorporation. Origi... |
Date: | 05 06 1980 |
---|---|
Description: | 48 inch clutch with spacer in the test lab at Falk. |
Date: | 12 1980 |
---|---|
Description: | Al Strobel works on a later component of a marine propulsion drive. Falk caption reads, "Prototype-new 1980 smallest size, used by Falk. In process photos ... |
Date: | 1951 |
---|---|
Description: | Single helical gear train that is a component of a gold mine hoist. This unit was purchased and used by Homestake Mining of Lead, South Dakota. Falk captio... |
Date: | 11 15 1982 |
---|---|
Description: | Mel Zdroik, a Falk employee, attends to a copper ore conveyor that was used by the Codelco Company of Chile, South America. Original Falk caption reads, "P... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: