Date: | 1919 |
---|---|
Description: | Three-quarter view from front right of a Lawson Air Liner parked near a hangar, with a group of men in military uniforms inspecting it. A woman in a white ... |
Date: | |
---|---|
Description: | Standard type of Gisholt Vertical Boring and Turning Mills manufactured as 52, 60, 64, and 72 inches. Gisholt was the first company to specialize in heavy ... |
Date: | 01 13 1943 |
---|---|
Description: | Male and female workers producing torpedo parts at an International Harvester factory. Original caption reads: "A battery of acetylene torches is here show... |
Date: | |
---|---|
Description: | Aerial left side view of an American Eagle Model A-101 in flight at the same elevation of the airplane in the foreground. The pilot is in the front cockpit... |
Date: | |
---|---|
Description: | Three-quarter view from front left of a Fokker Super Universal sitting on a runway. The tail identifier reads: "NC 4453." Printed on the side of the airpla... |
Date: | |
---|---|
Description: | Three-quarter view from front right of a Ford 4-AT-B Trimotor sitting on a runway. The tail identifier reads: "NX 4542." This airplane was one of three use... |
Date: | |
---|---|
Description: | Right side view of a Sikorsky S-38A sitting on a runway. The tail identifier reads: "NC8019." Five passengers and one crew member can be seen through the w... |
Date: | |
---|---|
Description: | Front view of a Sikorsky S-35 sitting on a runway. The S-35 is powered by three 420 hp Gnôme-Rhône Jupiter engines. Two men are working on the plane: one i... |
Date: | |
---|---|
Description: | Gisholt Standard Turret Lathe. The metal stamp states: "Gisholt Machine Co. Madison, Wis., U.S.A." Gisholt was the first company to specialize in heavy typ... |
Date: | |
---|---|
Description: | Gisholt Standard Turret Lathe. The metal stamp states: "Gisholt Machine Co. Madison, Wis., U.S.A." Gisholt was the first company to specialize in heavy typ... |
Date: | |
---|---|
Description: | Right side view of a Sikorsky S-31, equipped with a 200hp Wright J-4 engine, sitting on a runway. These models were bought by Fairchild Co. to be used for ... |
Date: | 12 21 1927 |
---|---|
Description: | Three-quarter view from left rear of a Keystone X.L.B-6 "Panther" sitting on a runway. The LB-6 models (including X.L.B-6) were light bombers produced for ... |
Date: | |
---|---|
Description: | Aerial view of a WACO ASO (also known as J-5 Straightwing and Whirlwind Waco) in flight. Two men are sitting in the front open cockpit, and one man is sitt... |
Date: | |
---|---|
Description: | Standard Turret Lathe, "Conradson," by American Turret Lathe Company in Wilmington, Delaware, "Patented December 26, 1899." Gisholt was the first company t... |
Date: | 1918 |
---|---|
Description: | British-built Sopwith Camels at the American Expeditionary Force 2nd Aviation Instruction Center near Tours, France. The Sopwith Camel, manufactured by the... |
Date: | |
---|---|
Description: | Left side view of an American Eagle Model A-101, a light 2/3-seat biplane, sitting in a field. There is a man sitting in the rear cockpit wearing an aviato... |
Date: | 1928 |
---|---|
Description: | Right side view of a Lockheed Vega 1 sitting in the snow. The tail identifier reads: "X3903." The airplane is equipped with a 220hp Wright J-5 engine. Capt... |
Date: | |
---|---|
Description: | Aerial view of three WACO ATO (10-T Taperwing) biplanes in flight. The wing identifiers of the two planes furthest to the right read: "7527" and "5673" (le... |
Date: | 1919 |
---|---|
Description: | Elevated view of the interior of the Lawson plant, a large open room with exposed ceiling and windows lining both walls. Part of the fuselage for a Lawson ... |
Date: | 1919 |
---|---|
Description: | Exterior view from field of a long brick Lawson plant building with a smokestack. Several automobiles are parked near the plant on the left, and on the rig... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: