Date: | 09 04 1956 |
---|---|
Description: | A view looking west of several workers in the Heat Treating Department of the Falk Corporation. |
Date: | 11 25 1957 |
---|---|
Description: | A male employee operates a large machine at the Falk Corporation. The gear was purchased and used by the Falk Corporation. Original Falk caption reads: "Th... |
Date: | 07 16 1968 |
---|---|
Description: | Two speed increasers that were purchased and used by The Boeing Corporation/Vertol Division. Falk caption reads, "Test stand drives for helicopter componen... |
Date: | 04 15 1971 |
---|---|
Description: | Male employee, Timothy Burton, inspecting a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R. Squibb and Sons. ... |
Date: | 01 1973 |
---|---|
Description: | Aerial view of the Falk Corporation. Falk caption reads, "Black and white negatives, furnished to advertising department by J. Blank. See similar color pic... |
Date: | |
---|---|
Description: | A Harnischfeger Corporation #14 KW machine creating a trench. The title caption gives the trench measurements as 22" x 5 1/2'. There is a house in the back... |
Date: | 09 10 1969 |
---|---|
Description: | Special dual output shaft speed reducers that were purchased by the Edge Wallboard Machinery Company and used by the Abitibi Carolina Corporation. Falk cap... |
Date: | 04 15 1971 |
---|---|
Description: | View of a male employee, Walter Drolhr, attending to a drive agitator. This product was purchased by Coppus Engineering Corporation and used by E.R Squibb ... |
Date: | 08 24 1971 |
---|---|
Description: | View of a 13 foot diameter hub gear that is a later component of a basic oxygen furnace drive. This gear was purchased and used by the Bethlehem Steel Corp... |
Date: | 1938 |
---|---|
Description: | D.W. Norred (left), International Shreveport branch, Roy Foster, switchman of the Rajo Oil Corporation, and Jack Anderson of Jack Anderson Company, an Inte... |
Date: | 07 05 1938 |
---|---|
Description: | An International P-20 power unit powers an oil pump owned by the Rajo Oil Corporation. A building is in the background. |
Date: | 1954 |
---|---|
Description: | Self-unloader, the Detroit Edison, Hull 418, is under construction and surrounded by scaffolding at Manitowoc Shipbuilding Corporation. |
Date: | 03 11 1968 |
---|---|
Description: | Tire curing press that was later purchased by McNeil Akron Corporation. Falk caption reads, "14-90T, 10 P Spur, 7 inch face. Crank gears have two unique fe... |
Date: | 09 14 1971 |
---|---|
Description: | View of a speed reducer that was purchased by the Kennedy Van Saun Corporation and used by Gresic Cement in Indonesia. Falk caption reads, "Design HP-3150,... |
Date: | 12 02 1963 |
---|---|
Description: | An employee stands near a cross rail that was later purchased by Onnsud Machine Works and used by Avco Corporation for cargo planes. Falk caption reads,"Ma... |
Date: | 09 15 1966 |
---|---|
Description: | 240P double piloted coupling. This coupling helps compile the centrifugal pump that was purchased by Foster Wheeler Corporation and later used by Commonwea... |
Date: | 09 15 1966 |
---|---|
Description: | Eighteen foot split ring gear that is on display at the Falk Corporation. Falk caption reads, "Photos of ring gear to be displayed at Association of Iron a... |
Date: | 01 05 1968 |
---|---|
Description: | A 27.000 x 24 vertical dredge pump drive is pictured that was later purchased by Ellicott Machine Corporation. Falk caption reads, "27.000 x 24 vertical dr... |
Date: | 05 31 1968 |
---|---|
Description: | Primary drive that was manufactured in the Special High Speed Division. This drive was later purchased and used by the Vertol Division/Boeing Corporation. ... |
Date: | 07 22 1970 |
---|---|
Description: | Large mill drive that was purchased by Koppers Corporation and used by Hanna Mining. Original Falk caption reads, "Large ring gear made to 1970. First ring... |
If you didn't find the material you searched for, our Library Reference Staff can help.
Call our reference desk at 608-264-6535 or email us at: